Categories
C Series Moulded Case Circuit Breaker

Meba Moulded Case Breaker Construction 3VF6

Meba Moulded Case Breaker Construction 3VF6

·Brief description
1. Compared with traditional circuit breaker or relevant fuse,MEBA C series circuit breaker has excellent protection performance in smaller space, in maximum range can satisfy rated current and faulty current’s requirement.
2. C series  circuit breaker  can  be used in cascade system,  meet next stage circuit breaker’s limit section capacity select protection req-uirement, save whole system cost.
C series circuit breaker complies with IECZ60947-2 international standard;  also comply with main industrial countries standard.

·Features
1. C series  circuit  breaker  including 7 basic frames, frame current from  100  to  2500A.  Each  frame  has up to  415V 100KA (AC240V 200KA)short circuit breaking capacity multiple choice, more flexibility in design, and save space as well.
2. Actually, using  C series  circuit breaker  can  avoid  in  re-design system.  It  can be used in original  switchboard,  feeder ark, bus duct, equipment control panel,  motor  control  center  substitute of old type circuit  breaker.  At  most situations,  can  adopt  same Connector bar, terminal and shaft structure.
3. Circuit  breaker  stan dard  temperature  is  40  degree,  for other higher  ambient  temperature  situation,  can  use  50  degree  factory finalize type design circuit breaker.
4. C series circuit breaker can be used in DC situation as well, 630A frame  3P  circuit breaker   concatenation  used  in  DC600V  breaking capacity can reach 40KA.

·Most reasonable contact terminal system design
C series circuit breaker flexible and special specific is adopt one of the most reasonable design in circuit breaker history, can assure circuit breaker in high fault current fast and reliable breaking.

·Whole testing process in factory
Each C series circuit breaker steady and reliable quality is acc-ording to a whole testing procedure assurance, each circuit breaker’s same pole has to make two times setting test to verify trip,  operating characteristic and electric circuit contentiously.

·High breaking capacity in smaller space
C circuit breaker in shape and electric function can be interchan-ged with Westinghouse moulded case circuit breaker, this means C series circuit breaker is ideal product after  improve its equipment design.

·Operation structure
1.C  series  circuit breaker adopt in fast-separate  and  fast-close mechanical  operation,  which has free trip function,  assure  circuit breaker in short circuit time can not keep closed.
2. Circuit  breaker’s  trip shaft’s  position and two sides’  windows point its working condition:  ‘witch-on’, ‘reak- brake’ and ‘rip’ If circuit breaker overloading,  short circuit, shunt  or  under voltage or press TEST button makes trip, shaft will slip to ‘rip’ position. At mean while if need  circuit  breaker re-switch on,  it should switch shaft to reset position then break brake.

·Current limit feature
   C series circuit breaker adopts high repulsion contact terminal structure and advantage ARC technology, so it has significant currentlimit function.

·Standard
  IEC60947-1:General rule
IEC60947-2:Circuit breaker
IEC60947-3:Switch, isolating switch, load switch etc.

C Series Trip unit type work

3VF Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

C series MCCB Structure

[Download not found]Meba Moulded Case Breaker Construction 3VF6 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
C Series Moulded Case Circuit Breaker

Meba Automatic Overload Circuit Breaker 3VF5

Meba Automatic Overload Circuit Breaker 3VF5

·Brief description
1. Compared with traditional circuit breaker or relevant fuse,MEBA C series circuit breaker has excellent protection performance in smaller space, in maximum range can satisfy rated current and faulty current’s requirement.
2. C series  circuit breaker  can  be used in cascade system,  meet next stage circuit breaker’s limit section capacity select protection req-uirement, save whole system cost.
C series circuit breaker complies with IECZ60947-2 international standard;  also comply with main industrial countries standard.

·Features
1. C series  circuit  breaker  including 7 basic frames, frame current from  100  to  2500A.  Each  frame  has up to  415V 100KA (AC240V 200KA)short circuit breaking capacity multiple choice, more flexibility in design, and save space as well.
2. Actually, using  C series  circuit breaker  can  avoid  in  re-design system.  It  can be used in original  switchboard,  feeder ark, bus duct, equipment control panel,  motor  control  center  substitute of old type circuit  breaker.  At  most situations,  can  adopt  same Connector bar, terminal and shaft structure.
3. Circuit  breaker  stan dard  temperature  is  40  degree,  for other higher  ambient  temperature  situation,  can  use  50  degree  factory finalize type design circuit breaker.
4. C series circuit breaker can be used in DC situation as well, 630A frame  3P  circuit breaker   concatenation  used  in  DC600V  breaking capacity can reach 40KA.

·Most reasonable contact terminal system design
C series circuit breaker flexible and special specific is adopt one of the most reasonable design in circuit breaker history, can assure circuit breaker in high fault current fast and reliable breaking.

·Whole testing process in factory
Each C series circuit breaker steady and reliable quality is acc-ording to a whole testing procedure assurance, each circuit breaker’s same pole has to make two times setting test to verify trip,  operating characteristic and electric circuit contentiously.

·High breaking capacity in smaller space
C circuit breaker in shape and electric function can be interchan-ged with Westinghouse moulded case circuit breaker, this means C series circuit breaker is ideal product after  improve its equipment design.

·Operation structure
1.C  series  circuit breaker adopt in fast-separate  and  fast-close mechanical  operation,  which has free trip function,  assure  circuit breaker in short circuit time can not keep closed.
2. Circuit  breaker’s  trip shaft’s  position and two sides’  windows point its working condition:  ‘witch-on’, ‘reak- brake’ and ‘rip’ If circuit breaker overloading,  short circuit, shunt  or  under voltage or press TEST button makes trip, shaft will slip to ‘rip’ position. At mean while if need  circuit  breaker re-switch on,  it should switch shaft to reset position then break brake.

·Current limit feature
   C series circuit breaker adopts high repulsion contact terminal structure and advantage ARC technology, so it has significant currentlimit function.

·Standard
  IEC60947-1:General rule
IEC60947-2:Circuit breaker
IEC60947-3:Switch, isolating switch, load switch etc.

C Series Trip unit type work

3VF Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

C series MCCB Structure

[Download not found]Meba Automatic Overload Circuit Breaker 3VF5 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
C Series Moulded Case Circuit Breaker

Meba Moulded Case Switch 3VF3

Meba Moulded Case Switch 3VF3

·Brief description
1. Compared with traditional circuit breaker or relevant fuse,MEBA C series circuit breaker has excellent protection performance in smaller space, in maximum range can satisfy rated current and faulty current’s requirement.
2. C series  circuit breaker  can  be used in cascade system,  meet next stage circuit breaker’s limit section capacity select protection req-uirement, save whole system cost.
C series circuit breaker complies with IECZ60947-2 international standard;  also comply with main industrial countries standard.

·Features
1. C series  circuit  breaker  including 7 basic frames, frame current from  100  to  2500A.  Each  frame  has up to  415V 100KA (AC240V 200KA)short circuit breaking capacity multiple choice, more flexibility in design, and save space as well.
2. Actually, using  C series  circuit breaker  can  avoid  in  re-design system.  It  can be used in original  switchboard,  feeder ark, bus duct, equipment control panel,  motor  control  center  substitute of old type circuit  breaker.  At  most situations,  can  adopt  same Connector bar, terminal and shaft structure.
3. Circuit  breaker  stan dard  temperature  is  40  degree,  for other higher  ambient  temperature  situation,  can  use  50  degree  factory finalize type design circuit breaker.
4. C series circuit breaker can be used in DC situation as well, 630A frame  3P  circuit breaker   concatenation  used  in  DC600V  breaking capacity can reach 40KA.

·Most reasonable contact terminal system design
C series circuit breaker flexible and special specific is adopt one of the most reasonable design in circuit breaker history, can assure circuit breaker in high fault current fast and reliable breaking.

·Whole testing process in factory
Each C series circuit breaker steady and reliable quality is acc-ording to a whole testing procedure assurance, each circuit breaker’s same pole has to make two times setting test to verify trip,  operating characteristic and electric circuit contentiously.

·High breaking capacity in smaller space
C circuit breaker in shape and electric function can be interchan-ged with Westinghouse moulded case circuit breaker, this means C series circuit breaker is ideal product after  improve its equipment design.

·Operation structure
1.C  series  circuit breaker adopt in fast-separate  and  fast-close mechanical  operation,  which has free trip function,  assure  circuit breaker in short circuit time can not keep closed.
2. Circuit  breaker’s  trip shaft’s  position and two sides’  windows point its working condition:  ‘witch-on’, ‘reak- brake’ and ‘rip’ If circuit breaker overloading,  short circuit, shunt  or  under voltage or press TEST button makes trip, shaft will slip to ‘rip’ position. At mean while if need  circuit  breaker re-switch on,  it should switch shaft to reset position then break brake.

·Current limit feature
   C series circuit breaker adopts high repulsion contact terminal structure and advantage ARC technology, so it has significant currentlimit function.

·Standard
  IEC60947-1:General rule
IEC60947-2:Circuit breaker
IEC60947-3:Switch, isolating switch, load switch etc.

C Series Trip unit type work

3VF Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

C series MCCB Structure

[Download not found]Meba Moulded Case Switch 3VF3 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba MCB RCCB MCCB Breaker HLW-630

Meba MCB RCCB MCCB Breaker HLW-630

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

·Application
HLW-630 is one kind of latest developed molded case circuit breaker in our factory, it is according to cutler-hammer technology, at present we mainly export to South America and Middle East countries, quality is satisfied by our customers.

·Operating mechanism
1. G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

Type G F J K L
Frame Current(A) 100 225 250 400 630
Culter-hammer Specifications GWF FW HFW FWH HFWF HJW HKW HLW
Rated Current(A) 16-100 16-225 125-250 125-400 315-600
Number of Poles 3 Poles
Breaking Capacity(kA, rms), AC50/60Hz
IEC60947-2 220-240V AC Icu 65 85 100 85 100 100 100 100
Ics 33 85 100 85 100 100 100 100
380-415V AC Icu 25 40 70 40 70 70 70 70
Ics 13 40 70 40 70 70 70 70
660-690V AC Icu 12 14 12 14 18 25 25
Ics 6 7 6 7 9 13 13
250V DC Icu 10 10 20 10 20 20 20 20
Ics 5 5 10 5 10 10 10 10
NEMA 240V AC 65 65 100 65 100 100 100 100
480VAC 22 25 65 25 65 65 65 65
600VAC 18 25 18 25 25 35 35
Rated Insulation Voltage Main Circuit 750VAC
Auxiliary Circuit 690VAC
Uimp Main Circuit 6kV 8kV
Auxiliary Circuit 4kV
Rated Working Voltage, Ue 440 690
Ambient Temperature From -20 to +70
Size(mm) H 123.8 152.4 177.8 280 273
W 76.2 105 105 140 210
D 66.7 86 103 104 104
Weight(kg) 1 2.4 5.2 6.1 9.4

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba MCB RCCB MCCB Breaker HLW-630 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba MCB MCCB Difference HKW-400

Meba MCB MCCB Difference HKW-400

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

·Application
HKW-400 is one kind of latest developed molded case circuit breaker in our factory, it is according to cutler-hammer technology, at present we mainly export to South America and Middle East countries, quality is satisfied by our customers.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

Type G F J K L
Frame Current(A) 100 225 250 400 630
Culter-hammer Specifications GWF FW HFW FWH HFWF HJW HKW HLW
Rated Current(A) 16-100 16-225 125-250 125-400 315-600
Number of Poles 3 Poles
Breaking Capacity(kA, rms), AC50/60Hz
IEC60947-2 220-240V AC Icu 65 85 100 85 100 100 100 100
Ics 33 85 100 85 100 100 100 100
380-415V AC Icu 25 40 70 40 70 70 70 70
Ics 13 40 70 40 70 70 70 70
660-690V AC Icu 12 14 12 14 18 25 25
Ics 6 7 6 7 9 13 13
250V DC Icu 10 10 20 10 20 20 20 20
Ics 5 5 10 5 10 10 10 10
NEMA 240V AC 65 65 100 65 100 100 100 100
480VAC 22 25 65 25 65 65 65 65
600VAC 18 25 18 25 25 35 35
Rated Insulation Voltage Main Circuit 750VAC
Auxiliary Circuit 690VAC
Uimp Main Circuit 6kV 8kV
Auxiliary Circuit 4kV
Rated Working Voltage, Ue 440 690
Ambient Temperature From -20 to +70
Size(mm) H 123.8 152.4 177.8 280 273
W 76.2 105 105 140 210
D 66.7 86 103 104 104
Weight(kg) 1 2.4 5.2 6.1 9.4

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba MCB MCCB Difference HKW-400 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba Mcb And Mccb HJW-250

Meba Mcb And Mccb HJW-250

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

·Application
HJW-250 is one kind of latest developed molded case circuit breaker in our factory, it is according to cutler-hammer technology, at present we mainly export to South America and Middle East countries, quality is satisfied by our customers.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

Type G F J K L
Frame Current(A) 100 225 250 400 630
Culter-hammer Specifications GWF FW HFW FWH HFWF HJW HKW HLW
Rated Current(A) 16-100 16-225 125-250 125-400 315-600
Number of Poles 3 Poles
Breaking Capacity(kA, rms), AC50/60Hz
IEC60947-2 220-240V AC Icu 65 85 100 85 100 100 100 100
Ics 33 85 100 85 100 100 100 100
380-415V AC Icu 25 40 70 40 70 70 70 70
Ics 13 40 70 40 70 70 70 70
660-690V AC Icu 12 14 12 14 18 25 25
Ics 6 7 6 7 9 13 13
250V DC Icu 10 10 20 10 20 20 20 20
Ics 5 5 10 5 10 10 10 10
NEMA 240V AC 65 65 100 65 100 100 100 100
480VAC 22 25 65 25 65 65 65 65
600VAC 18 25 18 25 25 35 35
Rated Insulation Voltage Main Circuit 750VAC
Auxiliary Circuit 690VAC
Uimp Main Circuit 6kV 8kV
Auxiliary Circuit 4kV
Rated Working Voltage, Ue 440 690
Ambient Temperature From -20 to +70
Size(mm) H 123.8 152.4 177.8 280 273
W 76.2 105 105 140 210
D 66.7 86 103 104 104
Weight(kg) 1 2.4 5.2 6.1 9.4

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Mcb And Mccb HJW250 is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
Digital Display Type AC Automatic Voltage Regulator

Meba Servo Stabilizer SVC-E 2000VA

Meba Servo Stabilizer SVC-E 2000VA

General:

SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.

This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Input voltage Single phase 160V-250V
Output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency 90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5 – +40
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(KVA) Product size Package size Weight Qty
D*W*H(cm) D*W*H(cm) (kg)
Single-phase two-wire (desk type) SVC-0.5 17*19*13 44*25*35 5 4
SVC-1 20*22*16 50*28*40 7 4
SVC-1.5 20*22*16 50*28*40 8 4
SVC-2 26*24*19 34*32*50 14 2
SVC-3 29*22*24 62*38*34 16 2
SVC-5 46*24*29 54*32*27 27 1
SVC-8 57*27*24 71*40*35 40 1
SVC-10 57*27*24 71*40*35 41 1
Single-phase two-wire (vertical type) SVC-5 29*24*40 31*29*48 28.5 1
SVC-8 29 *24*42 40*35*52 39 1
SVC-10 29*24*42 40*35*52 40 1
SVC-15 40*33*65 48*45*90 75 1
SVC-20 58*35*68 68*48*90 110 1
SVC-30 53*43*102 64*53*112 165 1
SVC-45 79*43*129 90*65*140 200 1
SVC-60 79*43*129 90*65*140 250 1

[tab_item title=”PDF Download”] [Download not found] SVC-E 2KVA Servo Stabilizer suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.

Categories
Digital Display Type AC Automatic Voltage Regulator

Meba 10KVA Digital Display AC Voltage Regulators SVC-E 10KVA

Meba 10KVA Digital Display AC Voltage Regulators SVC-E 10KVA

General:

SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.

This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Input voltage Single phase 160V-250V
Output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency 90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5 – +40
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(KVA) Product size Package size Weight Qty
D*W*H(cm) D*W*H(cm) (kg)
Single-phase two-wire (desk type) SVC-0.5 17*19*13 44*25*35 5 4
SVC-1 20*22*16 50*28*40 7 4
SVC-1.5 20*22*16 50*28*40 8 4
SVC-2 26*24*19 34*32*50 14 2
SVC-3 29*22*24 62*38*34 16 2
SVC-5 46*24*29 54*32*27 27 1
SVC-8 57*27*24 71*40*35 40 1
SVC-10 57*27*24 71*40*35 41 1
Single-phase two-wire (vertical type) SVC-5 29*24*40 31*29*48 28.5 1
SVC-8 29 *24*42 40*35*52 39 1
SVC-10 29*24*42 40*35*52 40 1
SVC-15 40*33*65 48*45*90 75 1
SVC-20 58*35*68 68*48*90 110 1
SVC-30 53*43*102 64*53*112 165 1
SVC-45 79*43*129 90*65*140 200 1
SVC-60 79*43*129 90*65*140 250 1

[tab_item title=”PDF Download”] [Download not found] SVC-E 10KVADigital Display AC Voltage Regulators suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.

Categories
G series Moulded Case Circuit Breaker

Meba Culter Hammer Breakers MEE3050FFGV

Meba Culter Hammer Breakers MEE3050FFGV

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

MEE3050FFGV Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Culter Hammer Breakers MEE3050FFGV is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba Breaker MJS3250AAGV

Meba Breaker MJS3250AAGV

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

MEE3050FFGV Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Mem Breaker MJS3250AAGV is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba Motor Protector Breaker MLS3630AAGV

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

MEE3050FFGV Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Motor Protector Breaker MLS3630AAGV is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
Digital Display Type AC Automatic Voltage Regulator

Meba Digital Voltage Regulator Manufacture SVC-E 1KVA

General:

SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.

This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Input voltage Single phase 160V-250V
Output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency 90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5 – +40
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(KVA) Product size Package size Weight Qty
D*W*H(cm) D*W*H(cm) (kg)
Single-phase two-wire (desk type) SVC-0.5 17*19*13 44*25*35 5 4
SVC-1 20*22*16 50*28*40 7 4
SVC-1.5 20*22*16 50*28*40 8 4
SVC-2 26*24*19 34*32*50 14 2
SVC-3 29*22*24 62*38*34 16 2
SVC-5 46*24*29 54*32*27 27 1
SVC-8 57*27*24 71*40*35 40 1
SVC-10 57*27*24 71*40*35 41 1
Single-phase two-wire (vertical type) SVC-5 29*24*40 31*29*48 28.5 1
SVC-8 29 *24*42 40*35*52 39 1
SVC-10 29*24*42 40*35*52 40 1
SVC-15 40*33*65 48*45*90 75 1
SVC-20 58*35*68 68*48*90 110 1
SVC-30 53*43*102 64*53*112 165 1
SVC-45 79*43*129 90*65*140 200 1
SVC-60 79*43*129 90*65*140 250 1

[Download not found] SVC-E 1KVA Digital Voltage Regulator Manufacture suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.

Categories
Digital Display Type AC Automatic Voltage Regulator

Meba Digital Display Voltage Stabilizer SVC-E 1.5kva

General:

SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.

This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Input voltage Single phase 160V-250V
Output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency 90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5 – +40
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(KVA) Product size Package size Weight Qty
D*W*H(cm) D*W*H(cm) (kg)
Single-phase two-wire (desk type) SVC-0.5 17*19*13 44*25*35 5 4
SVC-1 20*22*16 50*28*40 7 4
SVC-1.5 20*22*16 50*28*40 8 4
SVC-2 26*24*19 34*32*50 14 2
SVC-3 29*22*24 62*38*34 16 2
SVC-5 46*24*29 54*32*27 27 1
SVC-8 57*27*24 71*40*35 40 1
SVC-10 57*27*24 71*40*35 41 1
Single-phase two-wire (vertical type) SVC-5 29*24*40 31*29*48 28.5 1
SVC-8 29 *24*42 40*35*52 39 1
SVC-10 29*24*42 40*35*52 40 1
SVC-15 40*33*65 48*45*90 75 1
SVC-20 58*35*68 68*48*90 110 1
SVC-30 53*43*102 64*53*112 165 1
SVC-45 79*43*129 90*65*140 200 1
SVC-60 79*43*129 90*65*140 250 1

[Download not found] SVC-E 3KVA Digital Display Voltage Stabilizer suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.

Categories
Air Circuit Breaker

Meba ACB Breaker L630S

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

E125S Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba ACB Breaker L630S   is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba MCB MCCB J250S

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

E125S Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba MCB MCCB J250S is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba Electromechanical Mould Case Circuit Breaker E125S

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

E125S Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Electromechanical Mould Case Circuit Breaker E125S is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
Digital Display Type AC Automatic Voltage Regulator

Meba AC Power Voltage Regulator SVC-E 500VA

General:

SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.

This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Input voltage Single phase 160V-250V
Output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency 90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5 – +40
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(KVA) Product size Package size Weight Qty
D*W*H(cm) D*W*H(cm) (kg)
Single-phase two-wire (desk type) SVC-0.5 17*19*13 44*25*35 5 4
SVC-1 20*22*16 50*28*40 7 4
SVC-1.5 20*22*16 50*28*40 8 4
SVC-2 26*24*19 34*32*50 14 2
SVC-3 29*22*24 62*38*34 16 2
SVC-5 46*24*29 54*32*27 27 1
SVC-8 57*27*24 71*40*35 40 1
SVC-10 57*27*24 71*40*35 41 1
Single-phase two-wire (vertical type) SVC-5 29*24*40 31*29*48 28.5 1
SVC-8 29 *24*42 40*35*52 39 1
SVC-10 29*24*42 40*35*52 40 1
SVC-15 40*33*65 48*45*90 75 1
SVC-20 58*35*68 68*48*90 110 1
SVC-30 53*43*102 64*53*112 165 1
SVC-45 79*43*129 90*65*140 200 1
SVC-60 79*43*129 90*65*140 250 1

[Download not found] SVC-E 500VA AC Power Voltage Regulator suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.

Categories
G series Moulded Case Circuit Breaker

Meba Maintenance of molded case circuit breakers H630h

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

H250h Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Maintenance of molded case circuit breakers H630h is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
G series Moulded Case Circuit Breaker

Meba Working Molded Case Circuit Breaker H125h

·Brief description
G series moulded case circuit breaker not only has compact volume than normal circuit breaker or fuse, but
also supply more advanced performance. Advantages as following:

■Easy installation accessory

■Easy installation accessory

■20A-2500A can equip with electronic trip

■Built in 20A earth fault protection

· Most reasonable contact terminal system design

Excellent contact terminal design makes G series circuit breaker outstanding performance and high flexibility possible. Our licensed technology adopts speed ’air-blowing’ system, this system adopts high breaking capacity fault current electric power function.

G circuit breaker adopts operation shaft equipment structer, this structer can trip freely when short circuit, shaft can direct definitely trip which caused in short circuit or overload, this fast and reliable operation system improve the safety performance.

·Completely testing before delivery
G circuit breaker’s quality and reliable is assured by completely testing, each pole on circuit breaker will make 2 times setting test to assure trip structure, operation structure and continuously and precision.

·Operating mechanism
1.
G circuit breaker adopts shaft operation feature, this shaft can instruct circuit breaker’s  working condition: ON OFF and PIPPED.

2. When circuit breaker appear overloading, short circuit, shunt or under voltage trip action, shaft will jump to TRIPPED (trip) position, at this time, if need to re-switch on must push shaft to RESET position.

3. On both sides of shaft on EG and RG frame there will have 2 windows, which direct circuit breaker’s  working condition, red, green and white each correspondence  to: On/OFF/TRIPPED.

G Series Trip Unit

H250h Parameter

Working condition:
1.The altitude not exceeding 2000m
2.The ambient temperature is from +40°Cto -5°C
3.Ambient environment is free from explosive danger and air or dust, which may cause corrosion of metal or weakness of insulation.
4.Ambient environment is free from erosion of rain or snow.
5.Pollution degree 3
6.Over-voltage category III

[Download not found] Meba Working Molded Case Circuit Breaker H125h is big ampere circuit breaker  with high breaking capacity match with RCCB, MCB  use  to protection power distribution equipment safety.

Categories
Automatic Voltage Regulator

Meba Voltage Stabilizer SVC-500VA

General:

SVC single-phase and three-phase high accuracy full-automatic AC voltage stabilizer is one kind of our dominant products, made up of contact auto voltage regulator, servo motor, automatic control circuit, etc.

When the power network voltage fluctuates or the load varies, automatic sampling control circuit will send signal to drive the servo motor which can adjust the position of carbon brush of auto voltage regulator, then, the output voltage will be adjusted to rated value and get a steady state.

It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.

This product is an ideal stabilized voltage supply, widely used in any locations requiring electricity and ensures your power device can run normally.

Application:

For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.

Performance:

Single-phase input voltage Single phase 160V-250V
Single-phase output voltage 1. 0.5KVA~3KVA: Single -phase 220V and 110V
2. 5KVA~30KVA: Single -phase 220V
Three-phase input voltage 1. Phase voltage 160-250V
2. Wire voltage 227-430V
Three-phase output voltage 1. Phase voltage 220V
2. Wire voltage 380V
Voltage stabilizing precision 220V±3% 110V±6%
Frequency 50Hz/60Hz
Adjustable time <1s(when input voltage has a change of 10%)
Efficiency >90%
Over-voltage protection 246V±4V
Delay time Long 5min±2min, short 5s±2s
Ambient temperature -5℃ ~ +40℃
Relative humidity ≤90%
Waveform distortion No additional waveform distortion
Load power factor 0.8
Dielectric strength 1500V/1min
lnsulation resistance ≥2MΩ

 

Model and Sepc:

Spec(VA) Product size DXWXH(cm) Package size DXWXH(cm) Weight (kg) Qty
Single-phase two-wire(desk type) SVC-500 17X19X13 44X25X35 5.0 4
SVC-1000 20X22X16 50X28X40 7.0 4
SVC-1500 20X22X16 50X28X40 8.0 4
SVC-2000 26X24X19 34X32X50 14 2
SVC-3000 29X22X24 62X38X34 16 2
SVC-5000 46X24X19 54X32X27 27 1
SVC-8000 57X27X24 71X40X35 40 1
SVC-10000 57X27X24 70X40X35 41 1
Three-phase four-wire SVC-1500 40X36X17 52X48X28 18 1
SVC-3000 42X38X19 54X50X31 23 1
SVC-4500 42X38X19 54X50X31 27 1
SVC-6000 37X28X68 48X40X78 39 1
SVC-9000 35X33X78 48X45X90 48 1
SVC-15000 43X38X73 55X51X90 85 1
Single-phase two-wire(desk type) SVC-5000 29X24X40 31X29X48 28.5 1
SVC-8000 29X24X42 40X35X52 39 1
SVC-10000 29X24X42 40X35X52 40 1
SVC-15000 40X33X65 48X45X90 75 1
SVC-20000 58X35X68 68X48X90 110 1
SVC-30000 53X43X102 64X53X112 165 1
SVC-45000 79X43X129 90X65X140 200 1
SVC-60000 79X43X129 90X65X140 250 1
Three-phase four-wire SVC-20000 43X51X91 64X55X106 124 1
SVC-30000 43X51X91 64X55X106 131 1
SVC-45000 65X43X95 78X55X110 197 1
SVC-60000 77X55X100 90X67X115 260 1
SVC-80000 77X55X100 90X67X115 290 1
SVC-100000 77X55X100 90X67X115 350 1

[Download not found] SVC 0.5KVA Voltage Stabilizer suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.