Model explanation of proximity switch:
|Number||Composition||Code and Definition|
|1||Switch catalogue||LM: inductance type; CM: capactitance type; SM:Hall type;
AM:safety explosion- proof type; XM: mimic linear type
|2||Outward appearance code||■: Cylinder type;
F: Angular column type and plane installation type
|3||Working voltage||30: 6-36VDC; 310: 5-24VDC; 320: 12-60VDC;
20: 90-250VAC; 210: 24-250VAC; 220: 380VAC;
40: 12-240VDC/24-240AC; 50: Special voltage
|4||Detection distance||01: 1mm; 05:5mm; 10:10mm|
|5||Output form||N: Three-line DC NPN output; P: Three-line DC PNP output;
L: Two-line DC output; ■: AC two-wire output;
J: Relay output; NP: NPN+PNP output
|6||Output state||A: NO; B: NC; C: NO+NC; MU: Mimic voltage; MI: Mimic current|
|7||Subsidiary functions||T: With connector; Y: Water proof, oil proof;
I: Special requirement; H: High temp resistance; R: Ring type
SM series Hall sensor is a kind of magnet sensitive sensor consisting of voltage regulator, Hall voltage generator, differential amplifier Schmidt trigger and the output pole of collector open circuit. Its input is the magnetic flux density. The output is a digital voltage signal.
– Compact volume
– high precision of repeated location
– Diversified exterior structures
– Good performance of anti-interference.
– Many output forms
– High on-off frequency
– Wide voltage range
– Dust proof,vibration proof,water proof and oil proof.
– With short-circuit protection and inverted connecting protection.
– Long service life
Technical Parameter(Magnetic Hall Sensor SM12):
|Outward appearance code:||SM12|
|Detectable object:||Permanent magnet|
|Output low level voltage:||200mV|
|Output high level voltage:||0.1uA|
|Working point magnetic density:||22mT|
|Protection grade:||IEC standard IP67|
|Model avalibale NPN NO||SM12-31010NA|
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.