Personnel and fire protection
Cable and line protection against overload and short-circuits.
I∆n ≤ 30 mA: additional protection
In the case of direct contact.
I∆n ≤ 300 mA: preventative fire protection
In the case of ground fault currents.
AC class – Tripping is ensured for sinusoidal,
Alternating currents, whether they be quickly applied or slowly increase.
1.3 Performance & Usage
Circuit breaker is mainly suitable for overload and short protection. It is especially used for illumination and distribution. It is of pleasing out-look, light weight, reliable performance, high breaking capacity, quick trip. etc.
Type(wave form of the earth leakage sensed)
Thermo-magnetic release characteristic
Number of poles
1P+N, 2P, 3P,3P+N, 4P
63, 80, 100
Rated sensitivity I∆n
0.03, 0.1, 0.3A
Rated residual making and breaking capacity I∆n
Rated short-circuit capacity Icn
Break time under I∆n
Rated impulse withstand voltage(1.2/50) Uimp
Dielectric TEST voltage, Freq for 1min
Insulated voltage UI
Contact position indicator
(with daily average≤35℃)
Terminal connection type
Terminal size top/bottom for cable
Terminal size top/bottom for busbar
On din rail EN60715(35mm) by means of fast dip device from top
Meba residual current with over current protection rcbo MBR3110C frame and parts adopt plastic of high inflammable resistance and shock resistance for long service life. It is mainly used for overload and short circuit protection.
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.