Categories
Residual Current Circuit Breaker With Over Current Protection

Meba C60 DPN RCBO Combined MCB RCD MBR116C

Protection against the effects of earth leakage, overload and short circuit currents.

■ 2 pole switching of phase & neutral. Phase protected against overloads and short circuits

■ Commercial, industrial and domestic electrical distribution systems

Note: must not be used as the sole means of providing protection against direct contact.

Application:

1. C65NLE RCBO is used for the protection against electrical leakage in the circuit of 50Hz or 60Hz, rated voltage single-phase 230V, 3 phase 400V, rated current up to 60A.

2. When somebody gets an electric shock or the residual current of the circuit exceeds the fixed value, the ELCB can cut off the power within the time.

3. It is automatically to protect the personal safety and preventing the equipment from the fault resulted by the residual current.

4. With this function, the ELCB can protect the circuit against overload and short circuit or can be used for the unfrequent switchover of the circuit under normal conditions.

5. It conforms to IEC61009 standard.

Performance & Usage
Circuit breaker is mainly suitable for overload and short protection. It is especially used for illumination and distribution. It is of pleasing out-look, light weight, reliable performance, high breaking capacity, quick trip. etc.

Rated Current

6, 10, 16, 20, 25, 32, 40A

Circuit breaker application

Distribution

Range of product

C60

Product or component type

Earth leakage circuit breaker

Device short name

C60 RCBO

Poles description

1P + N

Neutral position

Right

[In] rated current

20 A ( 30 °C )

Network type

AC

Trip unit technology

Thermal-magnetic

Curve code

C

Earth-leakage sensitivity

100 mA

Earth-leakage protection time delay

Instantaneous

Mounting support

35 mm symmetrical DIN rail

Working Frequency

50/60 Hz

Nominal voltage: 110/240V

Breaking capacity: 6000A Ics to BS EN 60898, and earth leakage tested to BS EN 61009

Tripping characteristics: C curve: the magnetic release operates between 5 and 10 In

Positive contact indication of the phase

conductor: in accordance with the IEE Wiring Regulations BS7671

Sensitivity: (non-adjustable) 30mA:

unwanted tripping: The DPN rcbo incorporates a filtering device, preventing the risks of unwanted tripping due to transient voltages (lightning, line disturbances on other equipment and transient currents from high capacitive circuits)

■ Visual indication of trip due to earth faults

AC Class

Cable capacities: Tunnel terminals up to 16mm2

Weight: 190g

Installation: Panel mounting on symmetrical DIN rail in multi-service type boards and standard

enclosures

■ Padlocking in the ON/OFF position by using

Comb busbars:

Comb busbars enable several circuit breakers to be supplied with power.

■ The supply to the comb busbar can be connected:

■ Directly across the circuit breaker terminals by a

16mm2 cable

OR

■ Via 25mm2 connectors. Suitable for use with DPN MCBs and DPN vigi or combinations of both

Characteristics:

Current rating at 400C:

■ 100A with a central connector

■ 125A with two supply points

Clip-on markers

Markers can be installed:

■ On the front face (max. 6 markers) Or above the downstream terminals (max. 4markers).

Meba Meba C60 DPN RCBO Combined MCB RCD MBR116C  frame and parts adopt plastic of high inflammable resistance and shock resistance for long service life. It is mainly used for overload and short circuit protection.