​

General Specifications

MBTC-10A 

Hot Runner Temperature Controller Series

 

Power Supply 1-phase 3-wire, 240Vac, 50/60Hz

3-phase 4-wire, 240Vac, 50/60Hz

3-phase 5-wire, 380Vac, 50/60Hz

 Mainframe Black
Control Module MBTC-A / MBTC-B / MBTC-C / MBTC-G
Sensor Type Thermocouple J or K Module Qt’y 10
Temperature Control 0~450℃(32~842℉) Control Mode Auto-PID / Manual
Output Type Zero Cross / Phase Angle Control Accuracy ±0.1%F.S
Connector Type Customized Load Capacity 15A, 3600W
Wiring Mode Customized Storage Temperature -20~70℃(-4~158℉)
Working Temperature 0~55℃(32~131℉) Working Humidity 10~80%RH(No condensing)

Features

Light Handy and Easy to use

  • Wide power supply range, AC85~400V
  • There are 2, 4, 6, 8, 10, 12, 24 zones for customers to select. • Thermocouple input protection, prevent module damaged by mis-connection • Thermocouple & heater inverse protection, prevent thermocouple damaged by mis-connection
  • Soft-start mode, avoid the humidity make the heater burn out
  • Compatible with YUDO, Athena, DME, PCS, INCOE,etc.

Alarm when the followings occurred

  1. Ultra-high or ultra-low Temperature
    2. Thermocouple break, short or inverse
    3. Thermocouple is out of its position
    4. Heater break, short or overload
    5. Output device is damaged
  2. Over voltage of power supply

Protection activated in the following situations:

  1. Over voltage self-protectd, max.AC500V
  2. Thermocouple input protection, prevent module damaged by misconnection
  3. Thermocouple & heater inverse protection, prevent thermocouple damaged by misconnection
  4. Soft-start mode, avoid the moisture make the heater burn out

5.Heater dehumidified time can be extended

PANEL INTRODUCTION

COMPONETS
■ Mainframe■ Module■ Connector■ Cable■ Blank plate (Exclude 2, 4, 6, 8,10,

Welcome

If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.

Fill out my online form.

Relative Products