Meba rccb and mcb MBL1210C

Meba rccb and mcb MBL1210C

has introduced the F200 Ground Fault Equipment Protector (GFEP), designed to protect equipment against damaging line-to-ground currents by disconnecting all ungrounded conductors of the faulted circuit. A ground fault is caused by an insulation loss between a live conductor and an exposed conductive part that creates a flow of current to the ground. Most short circuits initially manifest as ground faults, which, if undetected, can cause serious and costly damage to electrical systems and equipment. An  F200 GFEP added to an electrical system trips when the system leaks a significant current to ground, immediately preventing the potential short circuit before such damage can occur.

The MEBA F200 GFEP line consists of the 2-pole F202 for single phase networks, and the 4-pole F204 for split phases, Delta and Wye networks.  The F200 GFEP immediately detects ground faults by continuously measures the current balance between live conductors and the neutral using a toroidal current transformer.

Application:

1. MBL1210C, Residual Current Devices for earth leakage detection.

2. It is to be used in association with miniature circuit breakers, its function is to detect earth leakage current and open the connected circuit to protect people and equipment, major used in industrial application.

3. These devices are designed to meet the Earth Leakage Protection Standards of the IEC: IEC/EN 61008.

Merits:

Good quality , high breaking capability, updated structure,quick trip and guide installation, competitive price,excellent and safe performance,beautiful and compact appearance, etc .

Mounting Requirements:

1. Circumstance temperature -5°C ~ +40°C, average temperature not exceeding 35°C.
2. Altitude above sea level less than 2000 m.
3. Humidity not exceeding 50% at 40°C and not exceeding 90% at 25°C.
4. Installation class II or III.
5. Pollution class 2.
6. Installation method DIN Rail mounting type.
7. The external magnetism shall not be more than 5 times of terrestrial one.
8. Product shall be installed vertically at the place where there shall be no severe impact and vibration. The product is switched on when the handle is at upper position.

Meba rccb and mcb MBL1210C

Technical Parameter:
-Rated residual non-operating current(Ino): 0.5 In
– 35mm wide for 2 pole Din Rail installation.
– Residual current off-time: 0.1s
– Standsrd: IEC1008/EN61008
– Minimum value of rated breaking capacity(lm): 630A
– Rated Voltage(Un): 2pole, 230V AC
– Rated conditional short-circuit capacity (lnc): 6KA
– Rated Current(In): 25, 40, 63A
– Rated residual operating current(In): 30, 100, 300, 500mA

Welcome

If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.

Fill out my online form.