Meba surge arrestors MBD1-B100
Technical Parameter
Operation Elements
In three phases and four wires system, all three phase lines and one neutral line to earthing line have SPD to be protected, in normal service, the SPD is at the state of high resistance, when network produce surging over-voltage due to thunder or other reasons, SPD will be conductive within short time (ns), lead surging voltage into ground, consequently to protect the electric appliances of network. After surging voltage passed by SPD, and disappeared, SPD recover in high resistance. It will not have influence on the normal service of network.
Installation
– The SPD need not to be adjusted after in-stalled according to requirement.
– It can automatically protect the power net-work after proper installation.
– On services it need periodically check if SPD is invalid or not, meanwhile check red indicator of fuse lighting or not, please replace the invalid element on time.
Model and Signification
Technical Parameter
Model and specification |
MBD1-B60 |
MBD1-B80 |
MBD1-B100 |
Maxi continuous operating voltage |
750 |
420 |
385 |
275 |
420 |
385 |
320 |
275 |
420 |
385 |
320 |
275 |
Voltage protective level |
3.5 |
2.2 |
2.0 |
1.6 |
2.5 |
2.3 |
2.0 |
1.8 |
3.0 |
3.0 |
2.5 |
2 |
Maxi discharging current |
60 |
80 |
100 |
Nominal discharging current |
30 |
40 |
60 |
Response time |
<25 |
Protection grade |
IP20 |
Indication of invalidation |
Aging invalidation: white: Normal, red: invalidation |
Application |
Primary protection for in line |
Remote signal Function |
Can also picking |
Remarks |
Other maxi continuous operating voltage Can be customize |
Principle Diagrams
Outside Size Fig