Author: meba_admin

Categories
Modified Sine Wave Inverter

Meba power inverter DC 12V AC 220V 600W MB600U

meba power inverter dc 12v ac 220v 600w MB600U

Specification

Product Description

1. MEBA  modified sine wave inverters is one of the most popular power inverter series since the beginning. power inverter dc 12v ac 220v 600w inverter  it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 300W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA(optional )

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB600U-121 MB600U-122 MB600U-241 MB600U-242
Rated power 600W
Surge power 1200W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
Output waveform Modified Sine Wave
USB port 5V 500mA (optional)
Input voltage 12V 24V
Dimension 235*102*55.5mm (L*W*H)
N.W/unit 835g
QTY/Ctn 20pcs
Packing Double side blister / Gift box
Meas./Ctn 60*35*45cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS
Warranty 18 months

Note : if without USB, the model is MB600

Categories
Modified Sine Wave Inverter

Meba DC AC 500W Power Inverter MB500U

meba dc ac 500w Power Inverter MB500U

Specification

Product Description

1. MEBA  modified sine wave inverters is one of the most popular power inverter series since the beginning. DC / AC 500W power inverter  it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 500W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA(optional )

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB500U-121 MB500U-122 MB500U-241 MB500U-242
Rated power 500W
Surge power 1000W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
Output waveform Modified Sine Wave
USB port 5V 500mA (optional)
Input voltage 12V 24V
Dimension 235*102*55.5mm (L*W*H)
N.W/unit 835g
QTY/Ctn 20pcs
Packing Double side blister / Gift box
Meas./Ctn 60*35*45cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS
Warranty 18 months

Note : if without USB, the model is MB500

Categories
Modified Sine Wave Inverter

Meba DC to AC 400W power inverter with USB MB400U

meba dc to ac 400w power inverter with usb MB400U

Specification

Product Description

1. MEBA  modified sine wave inverters is one of the most popular power inverter series since the beginning. DC to AC 400W power inverter with USB it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 300W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA(optional )

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB400U-121 MB400U-122 MB400U-241 MB400U-242
Rated power 400W
Surge power 800W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
Output waveform Modified Sine Wave
USB port 5V 500mA (optional)
Input voltage 12V 24V
Dimension 195*102*55.5mm (L*W*H)
N.W/unit 630g
QTY/Ctn 20pcs
Packing Double side blister / Gift box
Meas./Ctn 60*35*45cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS
Warranty 18 months

Note : if without USB, the model is MB400

Categories
Modified Sine Wave Inverter

Meba 300W power inverter MB300U

meba 300w power inverter MB300U

Specification

Product Description

1. MEBA  modified sine wave inverters is one of the most popular power inverter series since the beginning. 300W power inverter it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 300W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA(optional )

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB300U-121 MB300U-122 MB300U-241 MB300U-242
Rated power 300W
Surge power 600W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
Output waveform Modified Sine Wave
USB port 5V 500mA (optional)
Input voltage 12V 24V
Dimension 195*102*55.5mm (L*W*H)
N.W/unit 630g
QTY/Ctn 20pcs
Packing Double side blister / Gift box
Meas./Ctn 60*35*45cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS
Warranty 18 months

Note : if without USB, the model is MB300

Categories
Modified Sine Wave Inverter

Meba modified sine wave inverter MB200U

meba modified sine wave inverter MB200U

Specification

Product Description

1. MEBA DC 12V output inverter 200w with USB modified sine wave inverters is one of the most popular power inverter series since the beginning. 200W inverter it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 200W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want and added cigarette lighter socket output can offer 12V DC.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA(optional )

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB300U-121 MB300U-122 MB300U-241 MB300U-242
Rated power 300W
Surge power 600W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
Output waveform Modified Sine Wave
USB port 5V 500mA (optional)
Input voltage 12V 24V
Dimension 195*102*55.5mm (L*W*H)
N.W/unit 630g
QTY/Ctn 20pcs
Packing Double side blister / Gift box
Meas./Ctn 60*35*45cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS
Warranty 18 months

 Note : if without USB, the model is MB300

Categories
Modified Sine Wave Inverter

Meba DC 12V output inverter 200w with USB MB200UC

meba dc 12v output inverter 200w with usb MB200UC

Specification

Product Description

1. MEBA DC 12V output inverter 200w with USB modified sine wave inverters is one of the most popular power inverter series since the beginning. 200W inverter it convert 12V/24VDC to 100-120V/220-240V AC, you can power for your electric appliances which rated power less 200W continuously.

2. There is DC cable with cigarette lighter plug and the DC cable clips included in packing, you can use in your car by plug into cigarette lighter socket or directly with batteries.

3. The optional USB output port offer one more choise for user. It can charge for some digital equipments as you want and added cigarette lighter socket output can offer 12V DC.

Product Features

1·Anodized alluminum case provides durability & max heat dissipation

2·DC cigarette lighter accessory plug and heavy –duty cable clamps for high-output direct battery connections both included.

3·USB output port 5V500mA

4·DC 12V cigarette lighter socket

5·Automatic restart function.

6·Two LED indicators on the front panel shows the working and failure state

7·ON/OFF switch control the inverter by hand

8·The inverter is compact , light weight and easy to operate.

9·Loads can be powered directly from the AC outlets.

10·The inverter is equipped with numerous protection features to guarantee safe and trouble-free

Technical Parameter

Protection Function :

1·Low voltage alarm & Shutdown

2·Over voltage protection

3·Overload protection

4·Over temperature protection

5·Short circuit protection

6·Reverse Polarity protection

7·Soft start

8·Auto reset after being in protected

Details:

Model MB200UC-121 MB200UC-122 MB200UC-241 MB200UC-242
Rated power 200W
Surge power 400W
Output voltage 110V 230V 110V 230V
Output frequency 50/60Hz ±3
USB Port 5V 500mA
Output waveform Modified Sine Wave
Cigarette lighter socket DC12V Max.Current 15Ampers
Input voltage 12V 24V
External changeable fuse 25A * 1 15A* 1
Dimension 130*90*43.7mm (L*W*H)
N.W/unit 465g
QTY/Ctn 28pcs
Packing Double side blister / Gift box
Meas./Ctn 58*30*38.5cm
Brand MEBA or OEM
Certification CE-EMC/LVD,RoHS, E-mark
Warranty 18 months
Categories
Temperature Controller

Meba boiler thermostat WPX-60

Meba boiler thermostat WPX-60

Specification

This thermostat is normally installed to control the room temperature up to 40° max.  on green houses ,hatchers, and everywhere is necessary to control the temperature up to 40℃.

It is made with a special spiral sensor to get a better sensibility on temperature variation.

Technical Parameter

1. Rating at 16A/250V

2. On off differential: 5º C

3. Temperature range:  0-40℃

4. Rating at : 250V / 16 (4) A

5.  Differential : 2 +/-1 degree C

6. Capillary : min. bending  radius should not less than 5 mm

7. IP 54

8. It can be used to control the temperature of piping and boiler

9. Note: Manufactured on customer requests

10. boiler thermostat Various size available

Categories
Timer relay

Meba Digital Timer TM-619

Meba digital timer TM-619

Specification

Application:

1. The electronic digital timer is specially suited for applications where equipment needs to be cycled ON and OFF up to 8 timer per day, and where automatic operation of the equipment requires occasional override by someone other than a qualified service professional.

2. They offer rugged construction, resistance to surges and humidity, operate between wide temperature extremes and come with a replaceable lithium battery.

3. A light indicator illuminates when the timer is in the ON position. Select feature allows timers to be continuously ON, OFF or in AUTO mode.

Applications Include:

Filter Pumps, Booster Pumps, Sprinkler Systems, Heating Systems, Lights, Fountains, Cleaning Systems, Security Systems and More.

Technical Parameter

FEATURES AND BENEFITS:

  • Digital 24Hr, 7 Day timer
  • Digital Electronic timer switch with daily and weekly programs
  • 8 or 16 events per day, 7 day programming blocks
  • One channel
  • LED power indicator
  • LCD display
  • Manual On/Off/Auto
  • 24 or 12 hour format
  • Battery backup
  • Power Supply: line voltage 12V DC/AC, 24V DC/AC, 110V AC or 240V AC 50/60 Hz
  • Contact Rating:  16A resistive
  • 8A Inductive/250V, 0.5HP/250V
  • Own Power Consumption:  3VA
  • Timing Resolution: 1 minute

Technical Data:

  Supply Voltage   120 VAC,220VAC,24VDC/AC,12VDC/AC, other voltage on request
 Dimensions   2 3/8″ High X 2 3/8″ Wide X 7/8″ Deep   (60*60*21mm)
  Own Consumption   Approx 3VA
  Own Consumption   Changeover contact or control power output
  Running Accuracy   ± 1 second / day at 20°C
  Load   1 minute for TM – 619 series
  Memory Back up   Resistive 16A, Inductive 8A, Motor  1/2HP
  Admissible Ambient Temp   -10°C ~ + 55°C(T55)

Model:

Meba-TM-619 Parameter

Categories
Residual Current Circuit Breaker

Rccb elcb MB5210C from Meba

Meba rccb elcb MB5210C

Meba rccb elcb MB5210C

Specification

Meba rccb elcb MB5210C , It is to be used in association with miniature circuit breakers, its function is to detect earth leakage current and open the connected circuit to protect people and equipment, major used in industrial application. These devices are designed to meet the Earth Leakage Protection Standards of the IEC: IEC/EN 61008.

Application：

1. MB5210C, Residual Current Devices for earth leakage detection.

2. It is to be used in association with miniature circuit breakers, its function is to detect earth leakage current and open the connected circuit to protect people and equipment, major used in industrial application.

3. These devices are designed to meet the Earth Leakage Protection Standards of the IEC: IEC/EN 61008.

Merits：

Good quality , high breaking capability, updated structure,quick trip and guide installation, competitive price,excellent and safe performance,beautiful and compact appearance, etc .

Mounting Requirements:

1. Circumstance temperature -5°C ~ +40°C, average temperature not exceeding 35°C.
2. Altitude above sea level less than 2000 m.
3. Humidity not exceeding 50% at 40°C and not exceeding 90% at 25°C.
4. Installation class II or III.
5. Pollution class 2.
6. Installation method DIN Rail mounting type.
7. The external magnetism shall not be more than 5 times of terrestrial one.
8. Product shall be installed vertically at the place where there shall be no severe impact and vibration. The product is switched on when the handle is at upper position.

Parameter

Meba residual current circuit  MB3410C

Technical Parameter:
1. Electromagnetic and Electronic type
2. 70mm wide for 4 pole Din Rail installation.
3. Standsrd: IEC1008/EN61008
4. Rated Voltage(Un): 4pole, 400V AC
5. Rated Current(In): 25, 40, 63A
6. Rated residual operating current(I△n): 30, 100, 300, 500mA
7. Rated residual non-operating current(I△no): 0.5 In
8. Residual current off-time: ≤0.1s
9. Minimum value of rated breaking capacity(lm): 630A
10. Rated conditional short-circuit capacity (lnc): 6KA
Categories
Surge Protective Device

Meba surge supressor MBS1204

Meba surge supressor MBS1204

Meba surge supressor MBS1204

Specification

Meba surge supressor MBS1204

LYD1 series surge protective device (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards.
Operation Elements

*SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
*  Maxi discharging current of each wire:  up to 100KA.
Installation
* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
* Generally it shall be mounted in the incoming side of main distribution panel or box.
* Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba surge protector MBS9

Meba surge protector MBS9

Meba surge protector MBS9

Specification

Meba surge protector MBS9

MBS9 series surge protective device (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards。

Operation Elements
* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
* Maxi discharging current of each wire:  up to 100KA.

Installation

* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

 

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba surge protection MBS7404

Meba surge protection MBS7404

Meba surge protection MBS7404

Specification

Meba surge protection MBS7404

MBS7404 series surge protective device (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards。

Operation Elements
* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
* Maxi discharging current of each wire:  up to 100KA.

Installation

* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

 

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba surge protection devices MBS8

Meba surge protection devices MBS8

Meba surge protection devices MBS8

Specification

Meba surge protection devices MBS8

MBS8 series surge protective device (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards。

Operation Elements
* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
* Maxi discharging current of each wire:  up to 100KA.

Installation

* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba surge protection device MBS3-65

Meba surge protection device MBS3-65

Meba surge protection device MBS3-65

Specification

Meba surge protection device MBS3-65

□MBS3-65 series surge protective device (hereinafter called SPD) is
suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply
system of AC 50/60Hz, rated voltage up to 380V, to protect from direct
and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device.
Operation Elements
Single pole structure, single pole or three poles combined SPD available.。
□ SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector can automatically separate SPD from the network, meanwhile send an indication signal.
□ The visible window show white color in normal service, if to be separated from network, it will show red color. It can adopt Kelvin wiring
mode.
□ Large current carrying capacity, fast response time, low residual voltage.
Installation
□ Category B surge protective device (SPD), used in the connection between equal pot-ential electrodes while thunder occur.
□ To be mounted: between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 2.5~35mm2.
□ Generally to be installed in low voltage main incoming distribution panel, overhead incoming.As required, the user can assemble single pole or three poles surge protective device freely.
□ Generally to be installed in low voltage main incoming distribution panel, earthing wire shall be dual color multi-strand soft copper conductor more than 16 mm2.

Parameter

Meba surge protection device MBS3-65

Model and specification MBSD3-15 MBSD3-40 MBSD3-65 MBSD3-80 MBSD3-100 MBSD3-120
Maxi continuous operating voltageUc(VAC) 420 275 420 275 420 275 420 275 420 275 420 275
voltage protective level Up(KV) 1.2 1 1.8 1.5 2.5 1.5 2.5 1.8 2.8 2 3 2
≤
Max discharging current(8/20us)Imax(KA) 15 45 65 80 100 120
Nominal discharging current (8/20us)In(KA) 5 15 30 40 50 60
Response time(ns) <25
Indication of invalidation Aging invalidation:White:Normal,Red: Invalidation
Protection grade IP20
Application Protection for in line
Categories
Surge Protective Device

Meba surge arrestor MBSU9

Meba surge arrestor MBSU9

Meba surge arrestor MBSU9

Specification

Meba surge arrestor MBSU9

Meba surge arrestor MBSU9 (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards.

Operation Elements

* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
* SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
*Maxi discharging current of each wire:  up to 100KA.

Installation
* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba power surge protection MBS10

Meba power surge protection MBS10

Meba power surge protection MBS10

Specification

Meba power surge protection MBS10  (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards.

Operation Elements

* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
* SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
*Maxi discharging current of each wire:  up to 100KA.

Installation
* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

 

 

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba power surge MBS21W

Meba power surge MBS21W

Meba power surge MBS21W

Specification

Meba power surge MBS21W (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards.
Operation Elements
* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
*Maxi discharging current of each wire:  up to 100KA.

Installation

* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

 

 

Parameter

Technical Parameter:
Categories
Surge Protective Device

Meba lightning surge protection MBS2

Meba lightning surge protection MBS2

Meba lightning surge protection MBS2

Specification

Meba lightning surge protection MBS2

□ MBS2series surge protective device (hereinafter called SPD) is developed no basis of absorbing foreign latest technology, used in power supply system of AC 50/60Hz, rated voltage 380V and below, to protect from direct and indirect lightning impulse and other transient over voltage.
□ SPD has two protection modes: MC and MD。
□ SPD is in compliance with GB18802.1/IEC61643-1 standards
Operation Elements
□ SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector can automatically separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be sepa-rated from network, it will show red color.
Installation
To be mounted between LPZOB or LPZ1 zone and LPZ2 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 2.5~ 35 mm2.Every pole of SPD shall be protected by fuse or mini circuit breaker. As required, the user can assemble single pole or three poles
surge protective device freely.

Parameter

Technical Parameter:
Model and specification MBS2-65 MBS2-40 MBS2-15 MBS2-8
Maxi continuous operating voltageUc(VAC) 420 275 420 275 420 275 420 275
voltage protective level Up(KV) ≤ 2.5 2 2 1.2 1.5 1 1.2 0.8
Max discharging current(8/20us)Imax(KA) 65 40 15 8
Nominal discharging current (8/20us)In(KA) 30 15 5 2
Response time(ns) <25
Indication of invalidation Aging invalidation:White:Normal,Red: Invalidation
Protection grade IP20
Application Protection for in line
Remote signal function If need, can supply
Categories
Surge Protective Device

Meba lightning arrestor MBS6140R

Meba lightning arrestor MBS6140R

Meba lightning arrestor MBS6140R

Specification

Meba lightning arrestor MBS6140R

□ MBS6140R series surge protective device (hereinafter called SPD) is suitably used in the TT、TN-S、TN-C、IT、TN-C-S and etc power supply system of AC 50/60Hz, rated voltage 380V and below, to protect from direct and indirect lightning impulse and other transient over voltage.
□SPD meets with GB18802.1/IEC61643-1 standard
Installation
□ MBS6140R is mounted between LPZ1 or LPZ2 zone and LPZ3 zone. The cross sectional area of multi-strand soft copper conductor to be connected: 2.5~ 35 mm2. It is used in distribution boxes of living house, computer center, communication equipment, electronic equipment and control equipment or nearest
socket box.
□ MBS6140R is mounted between LPZ0B or LPZ1 zone and LPZ2 zone. The cross
sectional area of multi-strand soft copper conductor to be connected: 2.5~ 35 mm2.
The Contact
Contact for remote communication can be provided for SPD, the contact has one pair for transferring, 11 as middle position, 12 and 11 opened under SPD acting, 14 and 11 closed under SPD acting, 11 and 14 as NO contact. If one or more of modules of SPD is invalid, the contact will be closed and send fault signal.

Parameter

Meba lightning arrestor MBS6140R

Technical Parameter:
Model and specification MBS6140 MBS6160 MBS6120
Maxi continuous operating voltageUc(VAC) 420 385 320 275 420 385 320 275 420 385 320 275
voltage protective level Up(KV) 2.5 2 1.8 1.6 2 1.8 1.6 1.3 1.8 1.5 1.3 1.2
≤
Max discharging current(8/20us)Imax(KA) 60 40 20
Nominal discharging current (8/20us)In(KA) 30 20 10
Response time(ns) <25
Indication of invalidation Aging invalidation:White:Normal,Red: Invalidation
Protection grade IP20
Application Protection for in line
Categories
Surge Protective Device

Meba lightning protection MBS1201

Meba lightning protection MBS1201

Meba lightning protection MBS1201

Specification

Meba lightning protection MBS1201 (hereinafter called SPD) is suitably used in the IT, TT, TN-C, TN-S, TN-C-S and etc power supply system of AC 50/60Hz, rated voltage up to 380V, to protect from direct and indirect lightning impulse and other transient over voltage. As per the conditions of IEC61643-1:1998-02 standard, Class I surge protective device, it is category B surge protective device. SPD has two protection modes: MC and MD, SPD is in compliance with GB18802.1/IEC61643-1 standards.
Operation Elements
* SPD as only one side of terminals, able to prevent from being electric touching, indoor fixedly mounted, limiting voltage.
*SPD has built-in disconnector, when SPD is invalid due to overheating or breakdown, the disconnector  can automatically  separate SPD from the network, meanwhile send an indication signal. The visible window show white color in normal service, if to be separated from network, it will show red color.
*Maxi discharging current of each wire:  up to 100KA.

Installation
* To be mounted between LPZ0A or LPZ0B zone and LPZ1 zone, adopts 35mm standard mounting rail. The cross sectional area of multi-strand soft copper conductor: 6 ~ 35 mm2.
*Generally it shall be mounted in the incoming side of main distribution panel or box.
*Earthing wire shall be of 10mm2 dual color conductor, its length not more than 500mm.

In order to eliminate the influence on normal service of power network due SPD is invalid, it shall  add fuse or  breaker  to  be  series connected in L line. (NB:selected accordingto standard current In)

Parameter

Technical Parameter: