Meba cee plugs and connectors MN1321
Meba cee plugs and connectors MN1321
Technical Parameter:
Author: meba_admin
General
1.1Function
Personnel and fire protection
Cable and line protection against overload and short-circuits.
1.2 Selection
I∆n ≤ 30 mA: additional protection
In the case of direct contact.
I∆n ≤ 300 mA: preventative fire protection
In the case of ground fault currents.
AC class – Tripping is ensured for sinusoidal,
Alternating currents, whether they be quickly applied or slowly increase.
1.3 Performance & Usage
Circuit breaker is mainly suitable for overload and short protection. It is especially used for illumination and distribution. It is of pleasing out-look, light weight, reliable performance, high breaking capacity, quick trip. etc.
|
Standard |
IEC60898 |
|
Type(wave form of the earth leakage sensed) |
AC |
|
Thermo-magnetic release characteristic |
8-12In |
|
Number of poles |
1P+N, 2P, 3P,3P+N, 4P |
|
Rated current(In) |
63, 80, 100 |
|
Rated sensitivity I∆n |
0.03, 0.1, 0.3A |
|
Rated residual making and breaking capacity I∆n |
2000A |
|
Rated short-circuit capacity Icn |
6000A |
|
Break time under I∆n |
≤0.1S |
|
Rated frequency |
50Hz |
|
Rated impulse withstand voltage(1.2/50) Uimp |
4000V |
|
Dielectric TEST voltage, Freq for 1min |
2.0Kv |
|
Insulated voltage UI |
500V |
|
Pollution degree |
3 |
|
Electrical life |
1500 |
|
Mechanical life |
8500 |
|
Contact position indicator |
Yes |
|
Protection degree |
IP20 |
|
Ambient temperature (with daily average≤35℃) |
-5~+40℃ |
|
Storage temperature |
-25~+70℃ |
|
Terminal connection type |
Cable/Pin-type busbar |
|
Terminal size top/bottom for cable |
16~50mm² |
|
6-1/10AWG |
|
|
Terminal size top/bottom for busbar |
16~35mm² |
|
6-2AWG |
|
|
Tightening torque |
3.5 N*m |
|
31 In-Ibs |
|
|
Mounting connection |
On din rail EN60715(35mm) by means of fast dip device from top |
Meba residual current with over current protection rcbo MBR3110C frame and parts adopt plastic of high inflammable resistance and shock resistance for long service life. It is mainly used for overload and short circuit protection.
Meba cee electrical sockets MN1301
Meba cee electrical socket MN6332
Meba cee electrical socket MN1302
Meba cee electrical plugs and sockets-MN1322
Meba cee electrical plugs and sockets-MN1322
Technical Parameter:
General:
SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.
This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.
Application:
For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.
Performance:
| Input voltage | Single phase 160V-250V |
| Output voltage | 1. 0.5KVA~3KVA: Single -phase 220V and 110V 2. 5KVA~30KVA: Single -phase 220V |
| Voltage stabilizing precision | 220V±3% 110V±6% |
| Frequency | 50Hz/60Hz |
| Adjustable time | <1s(when input voltage has a change of 10%) |
| Efficiency | ＞90% |
| Over-voltage protection | 246V±4V |
| Delay time | Long 5min±2min, short 5s±2s |
| Ambient temperature | -5℃ – +40℃ |
| Relative humidity | ≤90% |
| Waveform distortion | No additional waveform distortion |
| Load power factor | 0.8 |
| Dielectric strength | 1500V/1min |
| lnsulation resistance | ≥2MΩ |
Model and Sepc:
| Spec(KVA) | Product size | Package size | Weight | Qty | |
| D*W*H(cm) | D*W*H(cm) | (kg) | |||
| Single-phase two-wire (desk type) | SVC-0.5 | 17*19*13 | 44*25*35 | 5 | 4 |
| SVC-1 | 20*22*16 | 50*28*40 | 7 | 4 | |
| SVC-1.5 | 20*22*16 | 50*28*40 | 8 | 4 | |
| SVC-2 | 26*24*19 | 34*32*50 | 14 | 2 | |
| SVC-3 | 29*22*24 | 62*38*34 | 16 | 2 | |
| SVC-5 | 46*24*29 | 54*32*27 | 27 | 1 | |
| SVC-8 | 57*27*24 | 71*40*35 | 40 | 1 | |
| SVC-10 | 57*27*24 | 71*40*35 | 41 | 1 | |
| Single-phase two-wire (vertical type) | SVC-5 | 29*24*40 | 31*29*48 | 28.5 | 1 |
| SVC-8 | 29 *24*42 | 40*35*52 | 39 | 1 | |
| SVC-10 | 29*24*42 | 40*35*52 | 40 | 1 | |
| SVC-15 | 40*33*65 | 48*45*90 | 75 | 1 | |
| SVC-20 | 58*35*68 | 68*48*90 | 110 | 1 | |
| SVC-30 | 53*43*102 | 64*53*112 | 165 | 1 | |
| SVC-45 | 79*43*129 | 90*65*140 | 200 | 1 | |
| SVC-60 | 79*43*129 | 90*65*140 | 250 | 1 | |
[Download not found] SVC-E 3KVA Power Regulator suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.
General:
SVC-E Series (digital display type) single-phase voltage stabilizers adopts digital display technology, it can display the delay time, output voltage and protection state automatically and has advantage of time delay, over voltage & under voltage protection, automatic alarming, etc.
This voltage stabilizer is of common type, it has the function of connecting through the commercial power. It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.
Application:
For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.
Performance:
| Input voltage | Single phase 160V-250V |
| Output voltage | 1. 0.5KVA~3KVA: Single -phase 220V and 110V 2. 5KVA~30KVA: Single -phase 220V |
| Voltage stabilizing precision | 220V±3% 110V±6% |
| Frequency | 50Hz/60Hz |
| Adjustable time | <1s(when input voltage has a change of 10%) |
| Efficiency | ＞90% |
| Over-voltage protection | 246V±4V |
| Delay time | Long 5min±2min, short 5s±2s |
| Ambient temperature | -5℃ – +40℃ |
| Relative humidity | ≤90% |
| Waveform distortion | No additional waveform distortion |
| Load power factor | 0.8 |
| Dielectric strength | 1500V/1min |
| lnsulation resistance | ≥2MΩ |
Model and Sepc:
| Spec(KVA) | Product size | Package size | Weight | Qty | |
| D*W*H(cm) | D*W*H(cm) | (kg) | |||
| Single-phase two-wire (desk type) | SVC-0.5 | 17*19*13 | 44*25*35 | 5 | 4 |
| SVC-1 | 20*22*16 | 50*28*40 | 7 | 4 | |
| SVC-1.5 | 20*22*16 | 50*28*40 | 8 | 4 | |
| SVC-2 | 26*24*19 | 34*32*50 | 14 | 2 | |
| SVC-3 | 29*22*24 | 62*38*34 | 16 | 2 | |
| SVC-5 | 46*24*29 | 54*32*27 | 27 | 1 | |
| SVC-8 | 57*27*24 | 71*40*35 | 40 | 1 | |
| SVC-10 | 57*27*24 | 71*40*35 | 41 | 1 | |
| Single-phase two-wire (vertical type) | SVC-5 | 29*24*40 | 31*29*48 | 28.5 | 1 |
| SVC-8 | 29 *24*42 | 40*35*52 | 39 | 1 | |
| SVC-10 | 29*24*42 | 40*35*52 | 40 | 1 | |
| SVC-15 | 40*33*65 | 48*45*90 | 75 | 1 | |
| SVC-20 | 58*35*68 | 68*48*90 | 110 | 1 | |
| SVC-30 | 53*43*102 | 64*53*112 | 165 | 1 | |
| SVC-45 | 79*43*129 | 90*65*140 | 200 | 1 | |
| SVC-60 | 79*43*129 | 90*65*140 | 250 | 1 | |
[Download not found] SVC-E 500VA Power Regulator suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.
Meba ac power plugs and sockets MN1311
Meba ac power plugs and sockets MN1311
Technical Parameter:
Application
Meba electrical insulator MBSM-30 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
| Type | Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
1.Size: MBSM20, MBSM25S, MBSM25,MBSM30,MBSM35,MBSM40,MBSM45,MBSM51,MBSM60,MBSM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
Application
Meba electrical-insulators MBSM-40 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
| Type | Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
Features
1.Size: MBSM20, MBSM25S, MBSM25,MBSM30,MBSM35,MBSM40,MBSM45,MBSM51,MBSM60,MBSM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
Application
Meba resin low voltage electric insulator MBSM-25 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
| Type | Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
Features
1.Size: MBSM20, MBSM25S, MBSM25,MBSM30,MBSM35,MBSM40,MBSM45,MBSM51,MBSM60,MBSM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
Categories
Meba-insulator-MBSM-45
Application
Meba insulator MBSM-45 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
| Type | Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
1.Size: MBSM20, MBSM25S, MBSM25,MBSM30,MBSM35,MBSM40,MBSM45,MBSM51,MBSM60,MBSM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
General:
SVC single-phase and three-phase high accuracy full-automatic AC voltage stabilizer is one kind of our dominant products, made up of contact auto voltage regulator, servo motor, automatic control circuit, etc.
When the power network voltage fluctuates or the load varies, automatic sampling control circuit will send signal to drive the servo motor which can adjust the position of carbon brush of auto voltage regulator, then, the output voltage will be adjusted to rated value and get a steady state.
It has excellent features, such as elegant appearance, compact structure, light weight, small waveform distortion, high efficiency, stable and reliable performance and so on.
This product is an ideal stabilized voltage supply, widely used in any locations requiring electricity and ensures your power device can run normally.
Application:
For office equipment, test equipment, lighting systems, safety alarm systems, communication systems, medical equipment, duplicators, stereo sound equipment, industrial automatic equipment, color film developing equipment, digital control machine tools, checkout equipment, TV sets, office appliances.
Performance:
| Single-phase input voltage | Single phase 160V-250V |
| Single-phase output voltage | 1. 0.5KVA~3KVA: Single -phase 220V and 110V 2. 5KVA~30KVA: Single -phase 220V |
| Three-phase input voltage | 1. Phase voltage 160-250V 2. Wire voltage 227-430V |
| Three-phase output voltage | 1. Phase voltage 220V 2. Wire voltage 380V |
| Voltage stabilizing precision | 220V±3% 110V±6% |
| Frequency | 50Hz/60Hz |
| Adjustable time | <1s(when input voltage has a change of 10%) |
| Efficiency | >90% |
| Over-voltage protection | 246V±4V |
| Delay time | Long 5min±2min, short 5s±2s |
| Ambient temperature | -5℃ ~ +40℃ |
| Relative humidity | ≤90% |
| Waveform distortion | No additional waveform distortion |
| Load power factor | 0.8 |
| Dielectric strength | 1500V/1min |
| lnsulation resistance | ≥2MΩ |
Model and Sepc:
| Spec(VA) | Product size DXWXH(cm) | Package size DXWXH(cm) | Weight (kg) | Qty | |
| Single-phase two-wire(desk type) | SVC-500 | 17X19X13 | 44X25X35 | 5.0 | 4 |
| SVC-1000 | 20X22X16 | 50X28X40 | 7.0 | 4 | |
| SVC-1500 | 20X22X16 | 50X28X40 | 8.0 | 4 | |
| SVC-2000 | 26X24X19 | 34X32X50 | 14 | 2 | |
| SVC-3000 | 29X22X24 | 62X38X34 | 16 | 2 | |
| SVC-5000 | 46X24X19 | 54X32X27 | 27 | 1 | |
| SVC-8000 | 57X27X24 | 71X40X35 | 40 | 1 | |
| SVC-10000 | 57X27X24 | 70X40X35 | 41 | 1 | |
| Three-phase four-wire | SVC-1500 | 40X36X17 | 52X48X28 | 18 | 1 |
| SVC-3000 | 42X38X19 | 54X50X31 | 23 | 1 | |
| SVC-4500 | 42X38X19 | 54X50X31 | 27 | 1 | |
| SVC-6000 | 37X28X68 | 48X40X78 | 39 | 1 | |
| SVC-9000 | 35X33X78 | 48X45X90 | 48 | 1 | |
| SVC-15000 | 43X38X73 | 55X51X90 | 85 | 1 | |
| Single-phase two-wire(desk type) | SVC-5000 | 29X24X40 | 31X29X48 | 28.5 | 1 |
| SVC-8000 | 29X24X42 | 40X35X52 | 39 | 1 | |
| SVC-10000 | 29X24X42 | 40X35X52 | 40 | 1 | |
| SVC-15000 | 40X33X65 | 48X45X90 | 75 | 1 | |
| SVC-20000 | 58X35X68 | 68X48X90 | 110 | 1 | |
| SVC-30000 | 53X43X102 | 64X53X112 | 165 | 1 | |
| SVC-45000 | 79X43X129 | 90X65X140 | 200 | 1 | |
| SVC-60000 | 79X43X129 | 90X65X140 | 250 | 1 | |
| Three-phase four-wire | SVC-20000 | 43X51X91 | 64X55X106 | 124 | 1 |
| SVC-30000 | 43X51X91 | 64X55X106 | 131 | 1 | |
| SVC-45000 | 65X43X95 | 78X55X110 | 197 | 1 | |
| SVC-60000 | 77X55X100 | 90X67X115 | 260 | 1 | |
| SVC-80000 | 77X55X100 | 90X67X115 | 290 | 1 | |
| SVC-100000 | 77X55X100 | 90X67X115 | 350 | 1 | |
[Download not found] SVC 10KVA Automatic Voltage Regulators suit for office equipment, test equipment, medical equipment, industrial automation equipment, household lighting system, communication system, etc.
Categories
Meba-busbar insulator-MBSM-51
Application
Meba busbar insulator MBSM-51 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
| Type | Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
1.Size: MBSM20, MBSM25S, MBSM25,MBSM30,MBSM35,MBSM40,MBSM45,MBSM51,MBSM60,MBSM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
Application
Meba multifunctional led flash lamp BW7620A is applicable to mobile lighting in Zone 0 explosive and flammable places. And is used for mobile lighting during the inspection, examination and rescue in the fields of network power, railway, petrochemical, oil field, and various industrial mines.
1.applied to hazardous place
2.explosion proof,water proof
3.high efficiency
4.LED high light torch
5.light weight
Technical Data
| Description | Unit | BW7620A Value | BW7620B Value | |
| Light Source | LED Power | W | 3 | 1 |
| luminous flux | Lm | 180 | 70 | |
| Useful time | h | 100,000 | 100,000 | |
| Battery | Rated capacity | mAh | 4000 | 4000 |
| Rated voltage | V | 3.7 | 3.7 | |
| Time of charging | h | 8 | 8 | |
| Useful time | Recycled | 500 times | 500 times | |
| Charger | input voltage | V | AC100-240 | AC100-240 |
| output voltage | V | DC4.5 | DC4.5 | |
| Output current | A | 1 | 1 | |
| Lighting time | h | High intensity light7h/worklight28h | High intensity light14h/work time28h | |
| Efficient range | m | 120 | 70 | |
| Temperature | °C | -20°C-40°C | -20°C-40°C | |
| Dimension | mm | 217.3×105.8×87 | 217.3×105.8×87 | |
| Net weight | g | 370 | 370 | |
. It uses LED lighting source.
. Charging voltage: AC100V-AC240V 50Hz/60Hz.
.Lithium battery for charging.
.Its focus is adjustable. The head can also be regulated in any angle within 0~130. It has frequency flashover function and can realize long-distance signal communication.
.The low intensity light and high intensity light can be shifted freely.
.Magnet is used for absorption. With water-proof design, it can float on water.
.It can be used on rainy days.
Meba ac dc power MBLPV -60-24
Meba ac dc power MBLPV -60-24
Features:·
Constant voltage style power supply
·Universal AC input range
·Small volume，low weight，high efficiency
·Protections: short circuit/over load/over voltage/over temp
·Cooling by free air convection
·Fully encapsulated with IP67 level
·100% full load burn-in test
·1 Year warranty
Technical Parameter:
|
Model |
LPV-60-12 |
LPV-60-24 |
LPV-60-36 |
LPV-60-48 |
|
|
output |
DC voltage |
12V |
24V |
36V |
48V |
|
Voltage tolerance |
±1% |
±1% |
±1% |
±1% |
|
|
Rated current |
5A |
2.5A |
1.7A |
1.3A |
|
|
Current range |
0~5A |
0~2.5A |
0~1.7A |
0~1.3A |
|
|
Rated power |
60W |
60W |
61.2W |
62.4W |
|
|
Ripple&noise |
100mvp-p |
150mvp-p |
180mvp-p |
180mvp-p |
|
|
input |
Voltage range |
90~264VAC，126~373VDC |
|||
|
Frequency |
47~63HZ |
||||
|
AC current |
1.6A/115VAC,0.8A/230VAC |
||||
|
Efficiency |
82% |
84% |
84% |
85% |
|
|
Inrush current |
Cold start current18A/115VAC, 36A/230VAC |
||||
|
Leakage current |
<1mA/240VAC |
||||
|
protection |
Over load |
Rated output power 115%~135%start over load protection |
|||
|
Protection type: hiccup mode，auto-recovery after fault condition is removed |
|||||
|
Over voltage |
15.6~17.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
|
|
Protection type: hiccup mode，auto-recovery after fault condition is removed |
|||||
|
Over temperature |
Shell temp≥85℃，start over temperature protection |
||||
|
Protection mode: cutoff output，auto-recovery after temperature become normal |
|||||
|
environment |
Working temp,humidity |
-10℃~+60℃，20%~90%RH |
|||
|
Storage temp.humidity |
-20℃~+85℃，10%~95%RH non condensing |
||||
|
Withstand vibration |
10~500HZ，2G 10min/1cycle，period for 60minutes，each axes |
||||
|
safety |
Withstand voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
|||
|
Isolated resistance |
I/P-O/P、I/P-FG、O/P-FG:100Mohms/500VDC |
||||
|
Fits standard |
Safety standard |
Fit UL1012，IP67 protect level |
|||
|
EMC standard |
Fit EN55022，CLASSA |
||||
|
Others |
Dimension |
190*49*34mm(L*W*H) |
|||
|
Weight/packing |
0.55kg/30pcs/17.5kg/0.025 m³/0.87CUFT |
||||
|
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||||
[tab_item title=”PDF Download”]MBLPV-60-24
Application
Meba led explosion flash lamps BW7300A(B) uses the latest technology to give excellent performance,robustness and reliability in the most extreme conditions. It is widely used in the fields of public security departments, railway,military,police,patrol,transportation, civil aviation, forestry and customs inspection etc.
1) led tactical police flashlight
2) 3W 1W , IP66
3) lithium battery
4) highlight,lowlight, strobe light
5) car charger
The flashlight includes:
1)1xflashlight
2)1xlithium battery
3)1x 100-240VAC charger
4)1x12v car charger
5)1x short belt
6)1xgift box
Technical Data
| Description | Unit | ZW7710 |
| Light source | Brand | CREE LED |
| Rated voltage | V | 3.7 |
| Light source Power | W | 3 |
| Rated capacity | Ah | 2.1 |
| High intensity light flux | Lm | 210 |
| Low intensity light flux | Lm | ≥60 |
| High intensityrun time | h | ≥4 |
| Low intensityrun time | h | 10 |
| Time of charging | h | 5~7 |
| Effective lighting distance | m | ≥200 |
| Service life of bulb | h | ≥100,000 |
| Service life of battery | Recycled | ≈1000 |
| Dimension | mm | φ35×150 |
| Net weight | g | 190 |
| Inner box size | mm | 215×155×45 |
| Carton No. | piece | 10 |
| Carton dimension | mm | 465×235×175 |
| Gross weight | Kg | 4.7 |
1)Light Source: CREE LED
2)Ingress protection: IP66.
3)The lamp enclosure is sealed to IP66,preventing the ingress of dust and sealing against
water in all condition except long time submersion.
4)Feature: Have attach head, can be use to defend. Anti skid body.
5)Long service life:100,000 hours, environmental friendly.
6)The low intensity light, high intensity light and strobe light can be shifted freely.
7)The sealed structure allows the flashlight work normally 1 meter underwater.
The extreme robustness alloy material is able to withstand the intense drop and impact.
8)Material: aluminium alloy material .
9)Powered by lithium battery (included), no memory effect.
10)Recharge voltage: AC100V-AC240V 50Hz/60Hz or 12V
11)Charger:AC220V mains charger and 12V vehicle charger.
Meba ac dc power MBLPV -100-24
Meba ac dc power MBLPV -100-24
Features:·
Constant voltage style power supply
·Universal AC input range
·Small volume，low weight，high efficiency
·Protections: short circuit/over load/over voltage/over temp
·Cooling by free air convection
·Fully encapsulated with IP67 level
·100% full load burn-in test
·1 Year warranty
Technical Parameter:
|
Model |
LPV-100-12 |
LPV-100-24 |
LPV-100-36 |
LPV-100-48 |
|
|
output |
DC voltage |
12V |
24V |
36V |
48V |
|
Voltage tolerance |
±1% |
±1% |
±1% |
±1% |
|
|
Rated current |
8.5A |
4.2A |
2.8A |
2.1A |
|
|
Current range |
0~8.5A |
0~4.2A |
0~2.8A |
0~2.1A |
|
|
Rated power |
102W |
100.8W |
100.8W |
100.8W |
|
|
Ripple&noise |
100mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
|
|
input |
Voltage range |
90~264VAC，126~373VDC |
|||
|
Frequency |
47~63HZ |
||||
|
AC current |
2.4A/115VAC,1.2A/230VAC |
||||
|
Efficiency |
82% |
84% |
84% |
85% |
|
|
Inrush current |
Cold start current20A/115VAC, 40A/230VAC |
||||
|
Leakage current |
<2.5mA/240VAC |
||||
|
protection |
Over load |
Rated output power 105%~135%start over load protection |
|||
|
Protection type: hiccup mode，auto-recovery after fault condition is removed |
|||||
|
Over voltage |
15.6~17.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
|
|
Protection type: hiccup mode，auto-recovery after fault condition is removed |
|||||
|
Over temperature |
Shell temp≥85℃，start over temperature protection |
||||
|
Protection mode: cutoff output，auto-recovery after temperature become normal |
|||||
|
environment |
Working temp,humidity |
-10℃~+60℃，20%~90%RH |
|||
|
Storage temp.humidity |
-20℃~+85℃，10%~95%RH non condensing |
||||
|
Withstand vibration |
10~500HZ，2G 10min/1cycle，period for 60minutes，each axes |
||||
|
safety |
Withstand voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
|||
|
Isolated resistance |
I/P-O/P、I/P-FG、O/P-FG:100Mohms/500VDC |
||||
|
Fits tandard |
Safety standard |
Fit UL1012，IP67 protect level |
|||
|
EMC standard |
Fit EN55022，CLASSA |
||||
|
Others |
Dimension |
185*69*43mm(L*W*H) |
|||
|
Weight/packing |
0.9kg/20pcs/19kg/0.026 m³/0.91CUFT |
||||
|
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||||
Application
Meba busbar insulation material MBSM-76 series products are sold well all over the world, and are exported to Malaysia, Thailand, Kenya, Mozambique, Congo, Rwanda, Pakistan, South Africa and so on. We have won a good reputation among customers at home and abroad. We will do our best to provide more high-quality products and services for you in the future!
1. Quality assurance: All the products will go through lots of tests carefully before dispatch: Raw material check, Painting check, Nameplate check and routine tests.
2. Competitive production capacity: monthly production more than 150000 pcs.
3. Manufactuer’s price: Factory direct sale, most competitive price.
SM series resin bus bar insulator(busbar insulator, standoff insulator)
Instruction
This product adopts unsaturated polyester glass fiber enhancement mode plastic, excellent electrical edge sex, heat resistance.Be used for Electrical switchgear panel. IT IS ONE KIND OF ISOLATOR PARTS ,DEPEND ON DIFFERENT SIZE;
1. Operating Termperature:-40–+140C ;
2. Insert Parts:Brass ;
resin insulator
1)CE, Rohs
2)Top 1 and 23 Years’ manufacture
3)Exported to Malaysia,Ethiopia,Congo
4)Cheapest one
Technical Data
| Model | MBSM-25 | MBSM-30 | MBSM-35 | MBSM-40 | MBSM-51 | MBSM-76 |
| tensile strength (LBS) | 500 | 550 | 600 | 650 | 1000 | 1500 |
| Flexural strength(FT LBS) | 6 | 8 | 10 | 10 | 20 | 40 |
| Dielectric(KV) | 6 | 8 | 10 | 12 | 15 | 25 |
| Screw thread(mm) | 6 | 6,8 | 8 | 8 | 8 | 10 |
| Weight(G) | 30 | 40 | 52 | 82 | 88 | 230 |
|
Type
|
Dimension (mm) | Screw (mm) | Tensile | Voltage | Torgue | ||||
| strength | withstand | strength | |||||||
| A | B | C | D | Dia. | Depth | (LBS) | (KV) | (FT LBS) | |
| MBSM-20 | 20 | Φ15 | 17 | 5 | M5 | 7 | 300 | 5 | 4 |
| MBSM-25S | 25 | Φ15 | 19 | 6 | M6 | 8 | 400 | 6 | 5 |
| MBSM-25 | 25 | Φ23 | 30 | 10 | M6 | 9 | 500 | 6 | 6 |
| MBSM-30 | 30 | Φ27 | 32 | 10 | M8 | 11 | 550 | 8 | 8 |
| MBSM-35 | 35 | Φ28 | 32 | 10 | M8 | 11 | 600 | 10 | 10 |
| MBSM-40 | 40 | Φ33 | 40 | 10 | M8 | 11 | 650 | 12 | 12 |
| MBSM-45 | 45 | Φ30 | 36 | 10 | M8 | 11 | 1000 | 14 | 20 |
| MBSM-51 | 51 | Φ29 | 36 | 12 | M8 | 14 | 1000 | 15 | 20 |
| MBSM-60 | 60 | Φ34 | 46 | 13 | M10 | 15 | 1200 | 20 | 35 |
| MBSM-76 | 76 | Φ35 | 50 | 15.5 | M10 | 20 | 1500 | 25 | 40 |
1.Size: SM20,SM25S,SM25,SM30,SM35,SM40,SM45,SM51,SM60,SM76
2.Variety of Screw M5, M6, M8, M10, M12
3.Made of bulk molding compound, unsaturated polymer with fiber glass(BMC, DMC),
4.Good electrical resistance, heat resistance, fire resistance, low shrinkage and water resistance properties
