Author: meba_admin

Miniature Circuit Breaker

is used in the single phase residual current of AC50/60Hz, rated voltage 220V or below for protecting electron circuit from overload and short circuit This product has advantages of high breaking capacity, small volume, width is only 18mm. Zero and live wire are cut off at the same time, preventing the person and fire danger. It is the ideal distribution protective switch in the civil residence field at present. This product conforms to the requirement of IEC60898.

Parameter

Meba electric fuse MBP41

. Pole No.: 1P,2P,3P,4P
. Rated voltage: AC 230V
. Rated current (A): 63A, 80A,100A
. Tripping curve: C, D
. Rated short-circuit capacity(Icn): 4000A
. Rated frequency: 50/60Hz
. Energy limiting class: 3
. Current Trip Curve: Type C: 5 a 10 In, Type D: 10 a 14 In

Features:

MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times rated current (Type C), 10 to 14 times rated current (Type D)

BIMETAL: ensures the breaker trip when overloaded.

ARC CHAMBER: effectively dissipates the electric arc that is generated by the opening contacts of the trigger mechanism in the presence of an overload or short circuit.

Gallery

PDF Download

Tags Circuit breaker, Electric fuse, MCB, MCB Breaker, Mini Circuit Breaker, miniature circuit breaker

Miniature Circuit Breaker

Meba dpn DZ30 circuit breaker

Post author By meba_admin
Post date 06/12/2013
No Comments on Meba dpn DZ30 circuit breaker

Specification

Meba dpn DZ30 circuit breaker

. Protection against both overload and short circuit
. Integrated with switched phase and neutral pole
. Neutral pole provides no protection against overload and short circuits
. Easy mounting onto 35mm DIN rail

Parameter

Meba dpn DZ30 circuit breaker

. Pole No.: 1P+N
. Rated voltage: AC 230V
. Rated current (A): 3, 6, 10, 16, 20, 25, 32
. Tripping curve: C
. Rated short-circuit capacity(Icn): 4500A
. Rated frequency: 50/60Hz
. Energy limiting class: 3
. Rated impulse withstand voltage: 6.2Kv
. Electro-mechanical endurance: 4000
. Connection terminal: Pillar terminal with clamp
. Connection capacity: Rigid cinductor up to 10mm<sub>2</sub>
. Fastening torque: 1.2Nm
. Installation:
On symmertical DIN rail 35mm
Panel mounting

Gallery

PDF Download

Miniature Circuit Breaker

Meba circuit breaker MBLSN

Post author By meba_admin
Post date 06/12/2013
No Comments on Meba circuit breaker MBLSN

Specification

Meba circuit breaker MBLSN

is mainly used in AC50/60HZ single-pole 230V or two, three, four-pole 400V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit under normal condition. The product is suitable for industry, business, building, residence, etc. It is conformity with GB10963,IEC60898 standards.

Parameter

MEBA Circuit Breaker MBLSN

Feature
1. Much higher short circuit breaking capacity.
2. Dual-connection convenient for both standard busbar and conductor connection.
3. Improved safety of operators offered by special design of terminals.
4. Much longer service life thanks to energy storage operating mechanism.
5. A variety of modular auxiliaries allows for easy and quick installation.
6. Enclosure and functional parts made of advanced plastics with flame-retardant,heat-resistant and impulse-proof properties.
7. Higher current-limiting capacity ensuring a cost-effective range of products.

Technical Data
– Rated current: 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A,40A,50A,63A.
– Tripping characteristics: B(3-5)In; C(5-10)In; D(10-15)In.
– No. of pole: 1p, 2p, 3p, 4p.
– Breaking capacity (see table1).

Rated current(A)	Pole	Rated Voltage(V)	Rated short-circuit breaking current (A)	COS
1~63	1	230,230/400	6000	0.7
1~63	2,3,4	400	6000	0.7

Gallery

PDF Download

Tags AC Triping Breaker, air circuit breaker, Circuit breaker, electric breaker, MCB

Miniature Circuit Breaker

Meba circuit breaker MS201

Post author By meba_admin
Post date 06/12/2013
No Comments on Meba circuit breaker MS201

Specification

Meba circuit breaker MS201

is mainly used in AC50/60HZ single-pole 230V or two, three, four-pole 400V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit under normal condition. The MS201 Circuit breaker is suitable for industry, business, building, residence, etc. It is conformity with GB10963,IEC60898 standards.

Parameter

Meba circuit breaker MS201

Data

Number of Poles: 1P,2P,3P, 4P

Rated Current(A):6A, 10A, 16A,20A, 25A, 32A, 40A, 50A, 63A

Breaking Capacity(A): 6000A

Rated Voltage(V):240/415V

Rated Frequency:50/60HZ

Electrical Life:6000

Mechanical life:20000

Protection degree:IP20

Feature

MEBA Circuit Breaker MS201 have flowing features:

MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times rated current (Type C), 3 to 5 times rated current ( Type B ), 10 to 14 times rated current ( Type D )

BIMETAL: ensures the breaker trip when overloaded.

ARC CHAMBER: effectively dissipates the electric arc that is generated by the opening contacts of the trigger mechanism in the presence of an overload or short circuit.

Gallery

PDF Download

Miniature Circuit Breaker

Meba B type MCB MBB8-63-4P

Post author By meba_admin
Post date 06/12/2013
No Comments on Meba B type MCB MBB8-63-4P

Specification

Meba B type mcb MBB8-63-4P

Parameter

Meba B type mcb MBB8-63-4P

Rated current(A)	Pole	Rated Voltage(V)	Rated short-circuit breaking current (A)	COS
1~63	1	230,230/400	6000	0.7
1~63	2,3,4	400	6000	0.7

Gallery

PDF Download

Tags electric mcb, MCB, mcb and mccb, mcb and rccb, square d mcb

Miniature Circuit Breaker

Meba B type mcb MBB8-63-3P

Post author By meba_admin
Post date 06/12/2013
No Comments on Meba B type mcb MBB8-63-3P

Specification

Meba B type mcb MBB8-63-3P

Parameter

Meba B type mcb MBB8-63-3P

Rated current(A)	Pole	Rated Voltage(V)	Rated short-circuit breaking current (A)	COS
1~63	1	230,230/400	6000	0.7
1~63	2,3,4	400	6000	0.7

Gallery

PDF Download

Tags ACB, electric mcb, MCB, MCB Breaker

Capacitor

Meba-lighting capacitor-HY-4.5uF

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-lighting capacitor-HY-4.5uF

Specification

Introduction

Meba lighting capacitor HY-4.5uF Capacitors of this series are particularly suitable for parallel compensation of discharge lamps. Dielectric consists of self-healing polypropylene film, case and cover are made of self-extinguishing.

Technical Data

Rated Voltage	250V-50/60Hz
Rated Voltage	280V~-50Hz
Working Temperature	-25~+85℃
Dissipation Factor	tan≤20 10-4@
Dissipation Factor	20℃ V=Vn,50Hz
Discharge Resistor	on request
Test Voltage	Between terminals
Test Voltage	2,15 Un for 2 secretary
Between Terminal and Case	2 kV for 60 sec (type test)
Reference Standards	EN 61048
Reference Standards	type B – EN 61049
Protection	Case in self.extinguishing
Protection	plastic material
Terminals	Unipolar leads insulated in
Terminals	PVC
Mounting Devices	M8 stud, clamp, captive feet
Capacitance Tolerance Different Tolerance Values are available on request	±5% to ±10%

Installing Diagram

Dimensions(mm)

Voltage(VAC)	Capacitance (μF)	DXH (mm)	Leads
250~280	3μF	34X68	Soft or Hard Wire Cable Wire Quick Conncitor
	3.5μF	34X68
	4μF	34X65
	4.5μF	34X68
	5μF	34X68
	6μF	34X68
	8μF	34X68
	10μF	34X68
	12μF	34X68
	15μF	34X68
	16μF	34X68
	18μF	38X70
	20μF	38X70
	21μF	38X70
	22μF	38X70
	25μF	38X70
	30μF	45X92
	31.5μF	45X92
	35μF	45X92
	36μF	45X92
	40μF	45X92
	45μF	50X100
	47μF	50X100
	50μF	50X117
	55μF	50X117
	60μF	50X117
	65μF	50X117

Gallery

Online Catalogue

[Download not found]

Tags Lighting capacitor

Capacitor

Meba-ac capacitor-HY10uF

Specification

Introduction

Capacitors of this series are particularly suitable for parallel compensation of discharge lamps. Dielectric consists of self-healing polypropylene film, case and cover are made of self-extinguishing.
Technical Data

Rated Voltage	250V~-50/60Hz
Rated Voltage	280V~-50Hz
Working Temperature	-25~+85℃
Dissipation Factor	tanΦ≤20 10-4@
Dissipation Factor	20℃V=Vn,50Hz
Discharge Resistor	on request
Test Voltage	Between terminals
Test Voltage	2,15 Un for 2 secretary
Between Terminal and Case	2 kV for 60 sec (type test)
Reference Standards	EN 61048
Reference Standards	type B – EN 61049
Protection	Case in self.extinguishing
Protection	plastic material
Terminals	Unipolar leads insulated in
Terminals	PVC
Mounting Devices	M8 stud, clamp, captive feet
Capacitance Tolerance Different Tolerance Values are available on request	±5% to ±10%

[/acc_item]
[acc_item title=”Installing Diagram“]

Dimensions(mm)

Voltage(VAC)	Capacitance (μF)	DXH (mm)	Leads
250~280	3μF	34X68	Soft or Hard Wire Cable Wire Quick Conncitor
	3.5μF	34X68
	4μF	34X65
	4.5μF	34X68
	5μF	34X68
	6μF	34X68
	8μF	34X68
	10μF	34X68
	12μF	34X68
	15μF	34X68
	16μF	34X68
	18μF	38X70
	20μF	38X70
	21μF	38X70
	22μF	38X70
	25μF	38X70
	30μF	45X92
	31.5μF	45X92
	35μF	45X92
	36μF	45X92
	40μF	45X92
	45μF	50X100
	47μF	50X100
	50μF	50X117
	55μF	50X117
	60μF	50X117
	65μF	50X117

Gallery

Online Catalogue

[Download not found]

Tags capacitor with dry type polypropylene film Wave cut Extruded round aluminum can with threaded Protection:IP20

Capacitor

Meba-capacitor voltage-HY20uF

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-capacitor voltage-HY20uF

Specification

Introduction

Rated Voltage	250V~-50/60Hz
Rated Voltage	280V~-50Hz
Working Temperature	-25~+85℃
Dissipation Factor	tanΦ≤20 10-4@
Dissipation Factor	20℃ V=Vn,50Hz
Discharge Resistor	on request
Test Voltage	Between terminals
Test Voltage	2,15 Un for 2 secretary
Between Terminal and Case	2 kV for 60 sec (type test)
Reference Standards	EN 61048
Reference Standards	type B – EN 61049
Protection	Case in self.extinguishing
Protection	plastic material
Terminals	Unipolar leads insulated in
Terminals	PVC
Mounting Devices	M8 stud, clamp, captive feet
Capacitance Tolerance Different Tolerance Values are available on request	±5% to ±10%

Installing Diagram

Dimensions(mm)

Voltage(VAC)	Capacitance (μF)	DXH (mm)	Leads
250~280	3μF	34X68	Soft or Hard Wire Cable Wire Quick Conncitor
	3.5μF	34X68
	4μF	34X65
	4.5μF	34X68
	5μF	34X68
	6μF	34X68
	8μF	34X68
	10μF	34X68
	12μF	34X68
	15μF	34X68
	16μF	34X68
	18μF	38X70
	20μF	38X70
	21μF	38X70
	22μF	38X70
	25μF	38X70
	30μF	45X92
	31.5μF	45X92
	35μF	45X92
	36μF	45X92
	40μF	45X92
	45μF	50X100
	47μF	50X100
	50μF	50X117
	55μF	50X117
	60μF	50X117
	65μF	50X117

Gallery

Online Catalogue

[Download not found]

Tags capacitor

Capacitor

Meba-electrical condenser-HY30UF

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-electrical condenser-HY30UF

Specification

Introduction

Meba electrical condenser HY30UF are particularly suitable for parallel compensation of discharge lamps. Dielectric consists of self-healing polypropylene film, case and cover are made of self-extinguishing.

Technical Data

Rated Voltage	250V~-50/60Hz
Rated Voltage	280V~-50Hz
Working Temperature	-25~+85℃
Dissipation Factor	tanΦ≤20 10-4@
Dissipation Factor	20℃V=Vn,50Hz
Discharge Resistor	on request
Test Voltage	Between terminals
Test Voltage	2,15 Un for 2 secretary
Between Terminal and Case	2 kV for 60 sec (type test)
Reference Standards	EN 61048
Reference Standards	type B – EN 61049
Protection	Case in self.extinguishing
Protection	plastic material
Terminals	Unipolar leads insulated in
Terminals	PVC
Mounting Devices	M8 stud, clamp, captive feet
Capacitance Tolerance Different Tolerance Values are available on request	±5% to ±10%

Installing Diagram

Dimensions

Voltage(VAC)	Capacitance (μF)	DXH (mm)	Leads
250~280	3μF	34X68	Soft or Hard Wire Cable Wire Quick Conncitor
	3.5μF	34X68
	4μF	34X65
	4.5μF	34X68
	5μF	34X68
	6μF	34X68
	8μF	34X68
	10μF	34X68
	12μF	34X68
	15μF	34X68
	16μF	34X68
	18μF	38X70
	20μF	38X70
	21μF	38X70
	22μF	38X70
	25μF	38X70
	30μF	45X92
	31.5μF	45X92
	35μF	45X92
	36μF	45X92
	40μF	45X92
	45μF	50X100
	47μF	50X100
	50μF	50X117
	55μF	50X117
	60μF	50X117
	65μF	50X117

Gallery

Online Catalogue

[Download not found]

Tags small-sized capacitor

Capacitor

Meba-capacitor-HY111 15Kvar 440V 3P

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-capacitor-HY111 15Kvar 440V 3P

Specification

Introduction

Dielectric:Polypropylene film
dry type
Wave cut
Extruded round aluminum can with threaded
Protection:IP20
Technical Data

Model	Rated Output(kvar)	Top Capacitance(μF)	Current		Size D1XH(mm)	Weight(kg)
Model	Rated Output(kvar)	Top Capacitance(μF)	Raled(A)	Max(A)	Size D1XH(mm)	Weight(kg)
400V 50/60Hz
0.4-5-3	5	3X33	3X7.2	3X14.4	76X180	0.7
0.4-6.25-3	6.25	3X40	3X9	3X14.4	76X180	0.7
0.4-7.5-3	7.5	3X51	3X11	3X17.6	76X235	0.9
0.4-8.3-3	8.3	3X57	3X12	3X24	76X235	1.3
0.4-10-3	10	3X68	3X15	3X27	86X235	1
0.4-12.5-3	12.5	3X82	3X18	3X33	86X235	1.3
0.4-15-3	15	3X100	3X22	3X33	100X235	1.5
0.4-16.6-3	16.6	3X111	3X24	3X44	100X235	1.3
0.4-20-3	20	3X137	3X29	3X54	116X235	1.7
0.4-25-3	25	3X166	3X36	3X56	116X285	2.1
0.4-30-3	30	3X199	3X43	3X56	116X285	2.1
0.4-33.3-3	33.3	3X221	3X48.1	3X76	116X390	4.7
0.4-40-3	40	3X265	3X58	3X76	116X390	4.7
415V 50/60Hz
0.415-5-3	5	3X33	3X7	3X12.2	76X180	0.7
0.415-7.5-3	7.5	3X46	3X10.4	3X18.3	76X235	0.9
0.415-8.3-3	8.3	3X51	3X11.5	3X20	76X235	0.9
0.415-10-3	10	3X62	3X14	3X22.5	86X235	1
0.415-12.5-3	12.5	3X77	3X17.4	3X28.5	86X235	1.3
0.415-13.3-3	13.3	3X82	3X18.5	3X30	86X235	1.3
0.415-15-3	15	3X92	3X21	3X34.5	100X235	1.3
0.415-16.6-3	16.6	3X100	3X23	3X37.5	100X235	1.5
0.415-20-3	20	3X123	3X28	3X45	116X235	1.5
0.415-25-3	25	3X154	3X35	3X56	116X285	2.1
0.415-30-3	30	3X186	3X41.7	3X68	116X285	2.6
0.415-40-3	40	3X246	3X56	3X80	116X390	4.7
440V 50/60Hz
0.44-5.6-3	5.6	3X31	3X7.3	3X14.4	76X180	0.7
0.44-6.25-3	6.25	3X33	3X8	3X16	76X180	0.7
0.44-7.5-3	7.5	3X41.1	3X10	3X16	76X235	0.7
0.44-8.3-3	8.3	3X46	3X11	3X21	76X235	0.9
0.44-10-3	10	3X57	3X14	3X26.3	86X235	1.3
0.44-11.2-3	11.2	3X62	3X15	3X27	86X235	1
0.44-12.5-3	12.5	3X68	3X16.4	3X30	86X235	1
0.44-14.1-3	14.1	3X77	3X18.5	3X33	100X235	1.3
0.44-15-3	15	3X82	3X20	3X30	100X235	1.3
0.44-16.6-3	16.6	3X92	3X22	3X39	100X235	1.3
0.44-20-3	20	3X111	3X27	3X49.5	116X235	1.5
0.44-22.5-3	22.5	3X123	3X30	3X45	116X235	1.5
0.44-25-3	25	3X137	3X33	3X56	116X285	1.7
0.44-28.2-3	28.2	3X154	3X37	3X56	116X285	2.1
0.44-30-3	30	3X166	3X40	3X56	116X285	2.1
0.44-33.3-3	33.3	3X186	3X44.4	3X68	116X390	2.6
0.44-40-3	40	3X221	3X52.5	3X76	116X390	4.7
0.44-50-3	50	3X274	3X65.6	3X86	116X390	4.7
525V 50/60Hz
0.525-2.5-3	2.5	3X10	3X2.7	3X5	76X120	0.7
0.525-5-3	5	3X19	3X5.5	3X10	76X180	0.7
0.525-7.5-3	7.5	3X29	3X8.2	3X14.4	76X235	0.9
0.525-10-3	10	3X38	3X11	3X18	86X235	1
0.525-12.5-3	12.5	3X48	3X14	3X22.5	86X235	1.3
0.525-15-3	15	3X58	3X17	3X27	100X235	1.5
0.525-18.5-3	18.5	3X71	3X20	3X30	100X235	2.1
0.525-20-3	20	3X77	3X22	3X36	116X235	1.7
0.525-22-3	22	3X84	3X24	3X36	116X235	2.1
0.525-25-3	25	3X96	3X28	3X45	116X285	2.1
0.525-30-3	30	3X115	3X33	3X54	116X285	2.1
0.525-40-3	40	3X154	3X44	3X72	116X390	4.7
690V 50/60Hz
0.69-5-3	5	3X11	3X4.2	3X6.7	76X180	0.7
0.69-7.5-3	7.5	3X16	3X6.3	3X10	76X235	1
0.69-8.3-3	8.3	3X197	3X7	3X11.5	76X235	1
0.69-10-3	10	3X23	3X8.4	3X12.6	86X235	1.3
0.69-12.5-3	12.5	3X27.6	3X10.5	3X16.5	86X235	2.1
0.69-13.3-3	13.3	3X31	3X11	3X18	86X235	1.5
0.69-16.6-3	16.6	3X37	3X14	3X21.6	100X235	2.1
0.69-20-3	20	3X46	3X17	3X27	116X235	2.1
0.69-25-3	25	3X56	3X21	3X33	116X285	2.1
0.69-33-3	33	3X74	3X28	3X43.5	116X285	2.6
800V 50/60Hz
0.8-6.7-3	6.7	3X11.1	3X4.8	3X7.7	76X235	1.3
0.8-10-3	10	3X16.6	3X7.2	3X11.5	86X235	1.3
0.8-13.3-3	13.3	3X22	3X9.6	3X15.4	100X235	1.5
0.8-16.7-3	16.7	3X27.7	3X12.1	3X18.5	100X235	1.5
0.8-20-3	20	3X33.2	3X14.4	3X21.6	116X235	2.1
0.8-26.7-3	26.7	3X44.3	3X19.3	3X29	116X285	2.9
0.8-28.9-3	28.9	3X47.9	3X21	3X31.5	116X285	2.9
0.8-31.2-3	31.2	3X51.7	3X22.5	3X34	116X285	2.9
0.8-33.3-3	33.3	3X55.2	3X24.0	3X36	116X390	4.7

Installing Diagram

Dimensions

Rated Capacitance CRand QR	According to specification table
Tolerance	-5/+10%
Connection	D(Delta)
Rated Voltage VR	According to specification table
Rated Frequency fR	50/60Hz
Maximum Ratings(to IEC 60831)
Maximunm Permissible Voltage Vmax	VR+10%(up to 8 h daily) VR+15%(up to 30 min daily) VR+20%(up to 5 min daily) VR+30%(up to 1 min daily)
Maximum Permissible Current Imax	Up to 1.3XIRincl. combined effects of harmonics, over voltages and capacitance
Maximum Transient Inrush Current	Up to 200XIR
Power Dissipation (dielectric)	＜0.2 W/kvar
Power Dissipation (excluding discharge resistors)	＜0.45 W/kvar
Test Data(accord. to IEC 60831)
AC Test Voltage terminal-to-terminal	2.15XVR,2s
Insulation Voltage Between Terminals and Container	3000V AC, 10s
Dissipation Factor ΦTanat 100Hz	≤1.0X10-3
Climatic Category/-40/D
Tmin (-)
Tmax (+)
Humidity	av.rel.＜95%
Maimun Altitude	4000m
Mean Life Expectancy
tLD (-)
Max. 5000 Switching per year acc. to IEC 60831
Safety
Mechanical	Overpressure disconnector
Max.	(AFC:10000)
Discharge	≤3 min (75V)
Reference Standards
IEC 60831-1/2. UL 810-5th Edition

Features

1.1. Three phase, delta connected.

1.2. With discharge resistor

1.3. Self-healing technology, overpressure disconnector

1.4. Naturally air cooled(or forced air cooling)

1.5. Indoor mounting

1.6. file#E307252

Gallery

Online Catalogue

[Download not found]

Tags capacitor with dry type polypropylene film Wave cut Extruded round aluminum can with threaded Protection

Capacitor

Meba-capacitance-HY111 15Kvar 380V 3P

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-capacitance-HY111 15Kvar 380V 3P

Specification

Introduction

Meba-capacitance-HY111 15Kvar 380V 3P

Dielectric:Polypropylene film
dry type
Wave cut
Extruded round aluminum can with threaded
Protection:IP20

Technical Data

Model	Rated Output(kvar)	Top Capacitance(μF)	Current		Size D1XH(mm)	Weight(kg)
Model	Rated Output(kvar)	Top Capacitance(μF)	Raled(A)	Max(A)	Size D1XH(mm)	Weight(kg)
400V 50/60Hz
0.4-5-3	5	3X33	3X7.2	3X14.4	76X180	0.7
0.4-6.25-3	6.25	3X40	3X9	3X14.4	76X180	0.7
0.4-7.5-3	7.5	3X51	3X11	3X17.6	76X235	0.9
0.4-8.3-3	8.3	3X57	3X12	3X24	76X235	1.3
0.4-10-3	10	3X68	3X15	3X27	86X235	1
0.4-12.5-3	12.5	3X82	3X18	3X33	86X235	1.3
0.4-15-3	15	3X100	3X22	3X33	100X235	1.5
0.4-16.6-3	16.6	3X111	3X24	3X44	100X235	1.3
0.4-20-3	20	3X137	3X29	3X54	116X235	1.7
0.4-25-3	25	3X166	3X36	3X56	116X285	2.1
0.4-30-3	30	3X199	3X43	3X56	116X285	2.1
0.4-33.3-3	33.3	3X221	3X48.1	3X76	116X390	4.7
0.4-40-3	40	3X265	3X58	3X76	116X390	4.7
415V 50/60Hz
0.415-5-3	5	3X33	3X7	3X12.2	76X180	0.7
0.415-7.5-3	7.5	3X46	3X10.4	3X18.3	76X235	0.9
0.415-8.3-3	8.3	3X51	3X11.5	3X20	76X235	0.9
0.415-10-3	10	3X62	3X14	3X22.5	86X235	1
0.415-12.5-3	12.5	3X77	3X17.4	3X28.5	86X235	1.3
0.415-13.3-3	13.3	3X82	3X18.5	3X30	86X235	1.3
0.415-15-3	15	3X92	3X21	3X34.5	100X235	1.3
0.415-16.6-3	16.6	3X100	3X23	3X37.5	100X235	1.5
0.415-20-3	20	3X123	3X28	3X45	116X235	1.5
0.415-25-3	25	3X154	3X35	3X56	116X285	2.1
0.415-30-3	30	3X186	3X41.7	3X68	116X285	2.6
0.415-40-3	40	3X246	3X56	3X80	116X390	4.7
440V 50/60Hz
0.44-5.6-3	5.6	3X31	3X7.3	3X14.4	76X180	0.7
0.44-6.25-3	6.25	3X33	3X8	3X16	76X180	0.7
0.44-7.5-3	7.5	3X41.1	3X10	3X16	76X235	0.7
0.44-8.3-3	8.3	3X46	3X11	3X21	76X235	0.9
0.44-10-3	10	3X57	3X14	3X26.3	86X235	1.3
0.44-11.2-3	11.2	3X62	3X15	3X27	86X235	1
0.44-12.5-3	12.5	3X68	3X16.4	3X30	86X235	1
0.44-14.1-3	14.1	3X77	3X18.5	3X33	100X235	1.3
0.44-15-3	15	3X82	3X20	3X30	100X235	1.3
0.44-16.6-3	16.6	3X92	3X22	3X39	100X235	1.3
0.44-20-3	20	3X111	3X27	3X49.5	116X235	1.5
0.44-22.5-3	22.5	3X123	3X30	3X45	116X235	1.5
0.44-25-3	25	3X137	3X33	3X56	116X285	1.7
0.44-28.2-3	28.2	3X154	3X37	3X56	116X285	2.1
0.44-30-3	30	3X166	3X40	3X56	116X285	2.1
0.44-33.3-3	33.3	3X186	3X44.4	3X68	116X390	2.6
0.44-40-3	40	3X221	3X52.5	3X76	116X390	4.7
0.44-50-3	50	3X274	3X65.6	3X86	116X390	4.7
525V 50/60Hz
0.525-2.5-3	2.5	3X10	3X2.7	3X5	76X120	0.7
0.525-5-3	5	3X19	3X5.5	3X10	76X180	0.7
0.525-7.5-3	7.5	3X29	3X8.2	3X14.4	76X235	0.9
0.525-10-3	10	3X38	3X11	3X18	86X235	1
0.525-12.5-3	12.5	3X48	3X14	3X22.5	86X235	1.3
0.525-15-3	15	3X58	3X17	3X27	100X235	1.5
0.525-18.5-3	18.5	3X71	3X20	3X30	100X235	2.1
0.525-20-3	20	3X77	3X22	3X36	116X235	1.7
0.525-22-3	22	3X84	3X24	3X36	116X235	2.1
0.525-25-3	25	3X96	3X28	3X45	116X285	2.1
0.525-30-3	30	3X115	3X33	3X54	116X285	2.1
0.525-40-3	40	3X154	3X44	3X72	116X390	4.7
690V 50/60Hz
0.69-5-3	5	3X11	3X4.2	3X6.7	76X180	0.7
0.69-7.5-3	7.5	3X16	3X6.3	3X10	76X235	1
0.69-8.3-3	8.3	3X197	3X7	3X11.5	76X235	1
0.69-10-3	10	3X23	3X8.4	3X12.6	86X235	1.3
0.69-12.5-3	12.5	3X27.6	3X10.5	3X16.5	86X235	2.1
0.69-13.3-3	13.3	3X31	3X11	3X18	86X235	1.5
0.69-16.6-3	16.6	3X37	3X14	3X21.6	100X235	2.1
0.69-20-3	20	3X46	3X17	3X27	116X235	2.1
0.69-25-3	25	3X56	3X21	3X33	116X285	2.1
0.69-33-3	33	3X74	3X28	3X43.5	116X285	2.6
800V 50/60Hz
0.8-6.7-3	6.7	3X11.1	3X4.8	3X7.7	76X235	1.3
0.8-10-3	10	3X16.6	3X7.2	3X11.5	86X235	1.3
0.8-13.3-3	13.3	3X22	3X9.6	3X15.4	100X235	1.5
0.8-16.7-3	16.7	3X27.7	3X12.1	3X18.5	100X235	1.5
0.8-20-3	20	3X33.2	3X14.4	3X21.6	116X235	2.1
0.8-26.7-3	26.7	3X44.3	3X19.3	3X29	116X285	2.9
0.8-28.9-3	28.9	3X47.9	3X21	3X31.5	116X285	2.9
0.8-31.2-3	31.2	3X51.7	3X22.5	3X34	116X285	2.9
0.8-33.3-3	33.3	3X55.2	3X24.0	3X36	116X390	4.7

Installing Diagram

Rated Capacitance CRand QR	According to specification table
Tolerance	-5/+10%
Connection	D(Delta)
Rated Voltage VR	According to specification table
Rated Frequency fR	50/60Hz
Maximum Ratings(to IEC 60831)
Maximunm Permissible Voltage Vmax	VR+10%(up to 8 h daily) VR+15%(up to 30 min daily) VR+20%(up to 5 min daily) VR+30%(up to 1 min daily)
Maximum Permissible Current Imax	Up to 1.3XIRincl. combined effects of harmonics, over voltages and capacitance
Maximum Transient Inrush Current	Up to 200XIR
Power Dissipation (dielectric)	＜0.2 W/kvar
Power Dissipation (excluding discharge resistors)	＜0.45 W/kvar
Test Data(accord. to IEC 60831)
AC Test Voltage terminal-to-terminal	2.15XVR,2s
Insulation Voltage Between Terminals and Container	3000V AC, 10s
Dissipation Factor TanΦ at 100Hz	≤1.0X10-3
Climatic Category/-40/D
Tmin (-)
Tmax (+)
Humidity	av.rel.＜95%
Maimun Altitude	4000m
Mean Life Expectancy
tLD (-)
Max. 5000 Switching per year acc. to IEC 60831
Safety
Mechanical	Overpressure disconnector
Max.	(AFC:10000)
Discharge	≤3 min (75V)
Reference Standards
IEC 60831-1/2. UL 810-5th Edition

Features

1.1. Three phase, delta connected.

1.2. With discharge resistor

1.3. Self-healing technology, overpressure disconnector

1.4. Naturally air cooled(or forced air cooling)

1.5. Indoor mounting

1.6. file#E307252

Gallery

Online Catalogue

[Download not found]

Tags capacitor

Capacitor

Meba-electrolytic capacitor-HY111 15Kvar 220V 3P

Post author By meba_admin
Post date 05/12/2013
No Comments on Meba-electrolytic capacitor-HY111 15Kvar 220V 3P

Specification

Introduction

Dielectric:Polypropylene film
dry type
Wave cut
Extruded round aluminum can with threaded
Protection:IP20

Technical Data

Model	Rated Output(kvar)	Top Capacitance(μF)	Current		Size D1XH(mm)	Weight(kg)
Model	Rated Output(kvar)	Top Capacitance(μF)	Raled(A)	Max(A)	Size D1XH(mm)	Weight(kg)
400V 50/60Hz
0.4-5-3	5	3X33	3X7.2	3X14.4	76X180	0.7
0.4-6.25-3	6.25	3X40	3X9	3X14.4	76X180	0.7
0.4-7.5-3	7.5	3X51	3X11	3X17.6	76X235	0.9
0.4-8.3-3	8.3	3X57	3X12	3X24	76X235	1.3
0.4-10-3	10	3X68	3X15	3X27	86X235	1
0.4-12.5-3	12.5	3X82	3X18	3X33	86X235	1.3
0.4-15-3	15	3X100	3X22	3X33	100X235	1.5
0.4-16.6-3	16.6	3X111	3X24	3X44	100X235	1.3
0.4-20-3	20	3X137	3X29	3X54	116X235	1.7
0.4-25-3	25	3X166	3X36	3X56	116X285	2.1
0.4-30-3	30	3X199	3X43	3X56	116X285	2.1
0.4-33.3-3	33.3	3X221	3X48.1	3X76	116X390	4.7
0.4-40-3	40	3X265	3X58	3X76	116X390	4.7
415V 50/60Hz
0.415-5-3	5	3X33	3X7	3X12.2	76X180	0.7
0.415-7.5-3	7.5	3X46	3X10.4	3X18.3	76X235	0.9
0.415-8.3-3	8.3	3X51	3X11.5	3X20	76X235	0.9
0.415-10-3	10	3X62	3X14	3X22.5	86X235	1
0.415-12.5-3	12.5	3X77	3X17.4	3X28.5	86X235	1.3
0.415-13.3-3	13.3	3X82	3X18.5	3X30	86X235	1.3
0.415-15-3	15	3X92	3X21	3X34.5	100X235	1.3
0.415-16.6-3	16.6	3X100	3X23	3X37.5	100X235	1.5
0.415-20-3	20	3X123	3X28	3X45	116X235	1.5
0.415-25-3	25	3X154	3X35	3X56	116X285	2.1
0.415-30-3	30	3X186	3X41.7	3X68	116X285	2.6
0.415-40-3	40	3X246	3X56	3X80	116X390	4.7
440V 50/60Hz
0.44-5.6-3	5.6	3X31	3X7.3	3X14.4	76X180	0.7
0.44-6.25-3	6.25	3X33	3X8	3X16	76X180	0.7
0.44-7.5-3	7.5	3X41.1	3X10	3X16	76X235	0.7
0.44-8.3-3	8.3	3X46	3X11	3X21	76X235	0.9
0.44-10-3	10	3X57	3X14	3X26.3	86X235	1.3
0.44-11.2-3	11.2	3X62	3X15	3X27	86X235	1
0.44-12.5-3	12.5	3X68	3X16.4	3X30	86X235	1
0.44-14.1-3	14.1	3X77	3X18.5	3X33	100X235	1.3
0.44-15-3	15	3X82	3X20	3X30	100X235	1.3
0.44-16.6-3	16.6	3X92	3X22	3X39	100X235	1.3
0.44-20-3	20	3X111	3X27	3X49.5	116X235	1.5
0.44-22.5-3	22.5	3X123	3X30	3X45	116X235	1.5
0.44-25-3	25	3X137	3X33	3X56	116X285	1.7
0.44-28.2-3	28.2	3X154	3X37	3X56	116X285	2.1
0.44-30-3	30	3X166	3X40	3X56	116X285	2.1
0.44-33.3-3	33.3	3X186	3X44.4	3X68	116X390	2.6
0.44-40-3	40	3X221	3X52.5	3X76	116X390	4.7
0.44-50-3	50	3X274	3X65.6	3X86	116X390	4.7
525V 50/60Hz
0.525-2.5-3	2.5	3X10	3X2.7	3X5	76X120	0.7
0.525-5-3	5	3X19	3X5.5	3X10	76X180	0.7
0.525-7.5-3	7.5	3X29	3X8.2	3X14.4	76X235	0.9
0.525-10-3	10	3X38	3X11	3X18	86X235	1
0.525-12.5-3	12.5	3X48	3X14	3X22.5	86X235	1.3
0.525-15-3	15	3X58	3X17	3X27	100X235	1.5
0.525-18.5-3	18.5	3X71	3X20	3X30	100X235	2.1
0.525-20-3	20	3X77	3X22	3X36	116X235	1.7
0.525-22-3	22	3X84	3X24	3X36	116X235	2.1
0.525-25-3	25	3X96	3X28	3X45	116X285	2.1
0.525-30-3	30	3X115	3X33	3X54	116X285	2.1
0.525-40-3	40	3X154	3X44	3X72	116X390	4.7
690V 50/60Hz
0.69-5-3	5	3X11	3X4.2	3X6.7	76X180	0.7
0.69-7.5-3	7.5	3X16	3X6.3	3X10	76X235	1
0.69-8.3-3	8.3	3X197	3X7	3X11.5	76X235	1
0.69-10-3	10	3X23	3X8.4	3X12.6	86X235	1.3
0.69-12.5-3	12.5	3X27.6	3X10.5	3X16.5	86X235	2.1
0.69-13.3-3	13.3	3X31	3X11	3X18	86X235	1.5
0.69-16.6-3	16.6	3X37	3X14	3X21.6	100X235	2.1
0.69-20-3	20	3X46	3X17	3X27	116X235	2.1
0.69-25-3	25	3X56	3X21	3X33	116X285	2.1
0.69-33-3	33	3X74	3X28	3X43.5	116X285	2.6
800V 50/60Hz
0.8-6.7-3	6.7	3X11.1	3X4.8	3X7.7	76X235	1.3
0.8-10-3	10	3X16.6	3X7.2	3X11.5	86X235	1.3
0.8-13.3-3	13.3	3X22	3X9.6	3X15.4	100X235	1.5
0.8-16.7-3	16.7	3X27.7	3X12.1	3X18.5	100X235	1.5
0.8-20-3	20	3X33.2	3X14.4	3X21.6	116X235	2.1
0.8-26.7-3	26.7	3X44.3	3X19.3	3X29	116X285	2.9
0.8-28.9-3	28.9	3X47.9	3X21	3X31.5	116X285	2.9
0.8-31.2-3	31.2	3X51.7	3X22.5	3X34	116X285	2.9
0.8-33.3-3	33.3	3X55.2	3X24.0	3X36	116X390	4.7

Installing Diagram

Features

Features1.1. Three phase, delta connected.1.2. With discharge resistor1.3. Self-healing technology, overpressure disconnector1.4. Naturally air cooled(or forced air cooling)1.5. Indoor mounting1.6. file#E307252[/tab_item]

Gallery

Online Catalogue

[Download not found]

Tags capacitor

Capacitor

Meba-motor capacitor-HY111-20KVAR 380V 3P

Post author By meba_admin
Post date 03/12/2013
No Comments on Meba-motor capacitor-HY111-20KVAR 380V 3P

Specification

Introduction

Meba-motor capacitor-HY111-20KVAR 380V 3P

Dielectric:Polypropylene film

Dry type
Wave cut
Extruded round aluminum can with threaded
Protection:IP20
Technical Data

Model	Rated Output(kvar)	Top Capacitance(μ F)	Current		Size D1XH(mm)	Weight(kg)
Model	Rated Output(kvar)	Top Capacitance(μ F)	Raled(A)	Max(A)	Size D1XH(mm)	Weight(kg)
400V 50/60Hz
0.4-5-3	5	3X33	3X7.2	3X14.4	76X180	0.7
0.4-6.25-3	6.25	3X40	3X9	3X14.4	76X180	0.7
0.4-7.5-3	7.5	3X51	3X11	3X17.6	76X235	0.9
0.4-8.3-3	8.3	3X57	3X12	3X24	76X235	1.3
0.4-10-3	10	3X68	3X15	3X27	86X235	1
0.4-12.5-3	12.5	3X82	3X18	3X33	86X235	1.3
0.4-15-3	15	3X100	3X22	3X33	100X235	1.5
0.4-16.6-3	16.6	3X111	3X24	3X44	100X235	1.3
0.4-20-3	20	3X137	3X29	3X54	116X235	1.7
0.4-25-3	25	3X166	3X36	3X56	116X285	2.1
0.4-30-3	30	3X199	3X43	3X56	116X285	2.1
0.4-33.3-3	33.3	3X221	3X48.1	3X76	116X390	4.7
0.4-40-3	40	3X265	3X58	3X76	116X390	4.7
415V 50/60Hz
0.415-5-3	5	3X33	3X7	3X12.2	76X180	0.7
0.415-7.5-3	7.5	3X46	3X10.4	3X18.3	76X235	0.9
0.415-8.3-3	8.3	3X51	3X11.5	3X20	76X235	0.9
0.415-10-3	10	3X62	3X14	3X22.5	86X235	1
0.415-12.5-3	12.5	3X77	3X17.4	3X28.5	86X235	1.3
0.415-13.3-3	13.3	3X82	3X18.5	3X30	86X235	1.3
0.415-15-3	15	3X92	3X21	3X34.5	100X235	1.3
0.415-16.6-3	16.6	3X100	3X23	3X37.5	100X235	1.5
0.415-20-3	20	3X123	3X28	3X45	116X235	1.5
0.415-25-3	25	3X154	3X35	3X56	116X285	2.1
0.415-30-3	30	3X186	3X41.7	3X68	116X285	2.6
0.415-40-3	40	3X246	3X56	3X80	116X390	4.7
440V 50/60Hz
0.44-5.6-3	5.6	3X31	3X7.3	3X14.4	76X180	0.7
0.44-6.25-3	6.25	3X33	3X8	3X16	76X180	0.7
0.44-7.5-3	7.5	3X41.1	3X10	3X16	76X235	0.7
0.44-8.3-3	8.3	3X46	3X11	3X21	76X235	0.9
0.44-10-3	10	3X57	3X14	3X26.3	86X235	1.3
0.44-11.2-3	11.2	3X62	3X15	3X27	86X235	1
0.44-12.5-3	12.5	3X68	3X16.4	3X30	86X235	1
0.44-14.1-3	14.1	3X77	3X18.5	3X33	100X235	1.3
0.44-15-3	15	3X82	3X20	3X30	100X235	1.3
0.44-16.6-3	16.6	3X92	3X22	3X39	100X235	1.3
0.44-20-3	20	3X111	3X27	3X49.5	116X235	1.5
0.44-22.5-3	22.5	3X123	3X30	3X45	116X235	1.5
0.44-25-3	25	3X137	3X33	3X56	116X285	1.7
0.44-28.2-3	28.2	3X154	3X37	3X56	116X285	2.1
0.44-30-3	30	3X166	3X40	3X56	116X285	2.1
0.44-33.3-3	33.3	3X186	3X44.4	3X68	116X390	2.6
0.44-40-3	40	3X221	3X52.5	3X76	116X390	4.7
0.44-50-3	50	3X274	3X65.6	3X86	116X390	4.7
525V 50/60Hz
0.525-2.5-3	2.5	3X10	3X2.7	3X5	76X120	0.7
0.525-5-3	5	3X19	3X5.5	3X10	76X180	0.7
0.525-7.5-3	7.5	3X29	3X8.2	3X14.4	76X235	0.9
0.525-10-3	10	3X38	3X11	3X18	86X235	1
0.525-12.5-3	12.5	3X48	3X14	3X22.5	86X235	1.3
0.525-15-3	15	3X58	3X17	3X27	100X235	1.5
0.525-18.5-3	18.5	3X71	3X20	3X30	100X235	2.1
0.525-20-3	20	3X77	3X22	3X36	116X235	1.7
0.525-22-3	22	3X84	3X24	3X36	116X235	2.1
0.525-25-3	25	3X96	3X28	3X45	116X285	2.1
0.525-30-3	30	3X115	3X33	3X54	116X285	2.1
0.525-40-3	40	3X154	3X44	3X72	116X390	4.7
690V 50/60Hz
0.69-5-3	5	3X11	3X4.2	3X6.7	76X180	0.7
0.69-7.5-3	7.5	3X16	3X6.3	3X10	76X235	1
0.69-8.3-3	8.3	3X197	3X7	3X11.5	76X235	1
0.69-10-3	10	3X23	3X8.4	3X12.6	86X235	1.3
0.69-12.5-3	12.5	3X27.6	3X10.5	3X16.5	86X235	2.1
0.69-13.3-3	13.3	3X31	3X11	3X18	86X235	1.5
0.69-16.6-3	16.6	3X37	3X14	3X21.6	100X235	2.1
0.69-20-3	20	3X46	3X17	3X27	116X235	2.1
0.69-25-3	25	3X56	3X21	3X33	116X285	2.1
0.69-33-3	33	3X74	3X28	3X43.5	116X285	2.6
800V 50/60Hz
0.8-6.7-3	6.7	3X11.1	3X4.8	3X7.7	76X235	1.3
0.8-10-3	10	3X16.6	3X7.2	3X11.5	86X235	1.3
0.8-13.3-3	13.3	3X22	3X9.6	3X15.4	100X235	1.5
0.8-16.7-3	16.7	3X27.7	3X12.1	3X18.5	100X235	1.5
0.8-20-3	20	3X33.2	3X14.4	3X21.6	116X235	2.1
0.8-26.7-3	26.7	3X44.3	3X19.3	3X29	116X285	2.9
0.8-28.9-3	28.9	3X47.9	3X21	3X31.5	116X285	2.9
0.8-31.2-3	31.2	3X51.7	3X22.5	3X34	116X285	2.9
0.8-33.3-3	33.3	3X55.2	3X24.0	3X36	116X390	4.7

Installing Diagram

Rated Capacitance CRand QR	According to specification table
Tolerance	-5/+10%
Connection	D(Delta)
Rated Voltage VR	According to specification table
Rated Frequency fR	50/60Hz
Maximum Ratings(to IEC 60831)
Maximunm Permissible Voltage Vmax	VR+10%(up to 8 h daily) VR+15%(up to 30 min daily) VR+20%(up to 5 min daily) VR+30%(up to 1 min daily)
Maximum Permissible Current Imax	Up to 1.3XIRincl. combined effects of harmonics, over voltages and capacitance
Maximum Transient Inrush Current	Up to 200XIR
Power Dissipation (dielectric)	＜0.2 W/kvar
Power Dissipation (excluding discharge resistors)	＜0.45 W/kvar
Test Data(accord. to IEC 60831)
AC Test Voltage terminal-to-terminal	2.15XVR,2s
Insulation Voltage Between Terminals and Container	3000V AC, 10s
Dissipation Factor TanΦ at 100Hz	≤1.0X10-3
Climatic Category/-40/D
Tmin (-)
Tmax (+)
Humidity	＜95%
Maimun Altitude	4000m
Mean Life Expectancy
tLD (-)
Max. 5000 Switching per year acc. to IEC 60831
Safety
Mechanical	Overpressure disconnector
Max.	(AFC:10000)
Discharge	≤3 min (75V)
Reference Standards
IEC 60831-1/2. UL 810-5th Edition

Features

Features

1.1. Three phase, delta connected.

1.2. With discharge resistor

1.3. Self-healing technology, overpressure disconnector

1.4. Naturally air cooled(or forced air cooling)

1.5. Indoor mounting

1.6. file#E307252[/tab_item]

Gallery

Online Catalogue

[Download not found]

Tags capacitor with dry type polypropylene film Wave cut Extruded round aluminum can with threaded Protection:IP20

Miniature Circuit Breaker

Meba B type mcb MBB8-63

Specification

Meba b type breaker MBB8-63

MCB is mainly used in AC50/60HZ single-pole 230V or two, three, four-pole 400V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit under normal condition. The product is suitable for industry, business, building, residence, etc. It is conformity with GB10963,IEC60898 standards.

Features

Meba b type breaker MBB8-63

Rated current(A)	Pole	Rated Voltage(V)	Rated short-circuit breaking current (A)	COS
1~63	1	230,230/400	6000	0.7
1~63	2,3,4	400	6000	0.7

Gallery

Online Catalogue

Tags Circuit breaker, electric mcb, MCB, Mini Circuit Breaker

Miniature Circuit Breaker

MEBA L7 with Indicator Breaker MBL8

Post author By meba_admin
Post date 03/12/2013
No Comments on MEBA L7 with Indicator Breaker MBL8

Specification

MEBA Breaker MBL8

MEBA Breaker MBL8 is used for protecting against electrical leakage in the circuit of 50Hz or 60Hz, rated voltage single-phase 240V, three phases 415V, rated current up to 63A. If the current exceeds the fixed value, the MBL9 breaker can cut off the power within the time of 0.1s automatically to protect the personal residual current. With this function, the MBL9 breaker can protect the unfrequent switch-over of the circuit under normal conditions.Standards: It conforms to IEC60898 IEC60947.

Parameter

MEBA Breaker MBL8

Product Details	Manufacturer: Meba Electric Enterprises
	Country of Origin: China
	Brand: Meba
	Model: MBL8
Manufacturing Standards	IEC 60898 IEC60947
Tropicalization	Relative Humidity	℃	93% RH at 25℃
	Room Temperature	℃	-5℃ a 40℃
Electrical Properties	Rated at 40℃	A	6/10/16/20/25/32/40/50/63
	Rated operating voltage at 40℃	Vac	240/415
	Nominal Frequency	Hz	50/60
	Interrupting Capacity at 230V	kA	6
	Operating temperature	℃	-5℃ a 40℃
	Degree of Protection		IP20
	Number of poles		1/2/3/4
	Conductor cross section (minimum allowable)	mm²	25
	Minimum number of power moves		6000
	Minimum number of mechanical operations		20000
	Operation curve		B/C/D
	Current Trip Curve	A	5 a 10 In
	Characteristic Intervention		attach
Type Of Assembly	FOR RIEL DIN 35 mm
Operation Indicator Window	The circuit breaker have an operating window color display that shows the state in which it is (connected or disconnected).
Features	MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times rated current (Type C), 3 to 5 times rated current (Type B), 10 to 14 times rated current (Type D)
	BIMETAL: ensures the breaker trip when overloaded.
	ARC CHAMBER: effectively dissipates the electric arc that is generated by the opening contacts of the trigger mechanism in the presence of an overload or short circuit.
Present Certificates	CE CB
	ISO 9001-2000 awarded by the competent certification body, Meba is qualified in the manufacturing of the object
	IEC 60898 standards in the manufacture of the goods
	Curve compliance issued Shot by an accredited laboratory for effect
	Life, given by Meba to ensure that the life of the goods offered by at least 15 years.
Testing For Acceptance	Before receiving the circuit breakers(breakers), customers may perform the tests may be necessary to ensure compliance with the technical specifications.
Packing	The packaging is sure that withstand any adverse conditions during transport and handling to the warehouse of cutomers.
Dial Century, Year, Month and Batch	In one of its sides the breaker is marked with permanent ink, year, month and batch.
Catalog	Attach catalogs indicating the technical specification
Shows	Submit sample of the product offered
Technical Warranty	2 YEARS
Place of Delivery	CNF&FOB
Delivery	25 DAYS

Gallery

PDF Download

Tags breaker, breaker circuit breaker, MCB

Miniature Circuit Breaker

Meba Breaker MBL9

Specification

MEBA Breaker MBL9

MEBA Breaker MBL9 is used for protecting against electrical leakage in the circuit of 50Hz or 60Hz, rated voltage single-phase 240V, three phases 415V, rated current up to 63A. If the current exceeds the fixed value, the MBL9 breaker can cut off the power within the time of 0.1s automatically to protect the personal residual current. With this function, the MBL9 breaker can protect the unfrequent switch-over of the circuit under normal conditions.Standards: It conforms to IEC60898 IEC60947.

Parameter

MEBA Breaker MBL9

Product Details	Manufacturer: Meba Electric Enterprises
	Country of Origin: China
	Brand: Meba
	Model: MBL9
Manufacturing Standards	IEC 60898 IEC60947
Tropicalization	Relative Humidity	℃	93% RH at 25℃
	Room Temperature	℃	-5℃ a 40℃
Electrical Properties	Rated at 40℃	A	6/10/16/20/25/32/40/50/63
	Rated operating voltage at 40℃	Vac	240/415
	Nominal Frequency	Hz	50/60
	Interrupting Capacity at 230V	kA	6
	Operating temperature	℃	-5℃ a 40℃
	Degree of Protection		IP20
	Number of poles		1/2/3/4
	Conductor cross section (minimum allowable)	mm²	25
	Minimum number of power moves		6000
	Minimum number of mechanical operations		20000
	Operation curve		B/C/D
	Current Trip Curve	A	5 a 10 In
	Characteristic Intervention		attach
Type Of Assembly	FOR RIEL DIN 35 mm
Operation Indicator Window	The circuit breaker have an operating window color display that shows the state in which it is (connected or disconnected).
Features	MAGNETIC COIL: ensures the switching of short-circuit, speaking within the following ranges: 5 to 10 times rated current (Type C), 3 to 5 times rated current (Type B), 10 to 14 times rated current (Type D)
	BIMETAL: ensures the breaker trip when overloaded.
	ARC CHAMBER: effectively dissipates the electric arc that is generated by the opening contacts of the trigger mechanism in the presence of an overload or short circuit.
Present Certificates	CE CB
	ISO 9001-2000 awarded by the competent certification body, Meba is qualified in the manufacturing of the object
	IEC 60898 standards in the manufacture of the goods
	Curve compliance issued Shot by an accredited laboratory for effect
	Life, given by Meba to ensure that the life of the goods offered by at least 15 years.
Testing For Acceptance	Before receiving the circuit breakers(breakers), customers may perform the tests may be necessary to ensure compliance with the technical specifications.
Packing	The packaging is sure that withstand any adverse conditions during transport and handling to the warehouse of cutomers.
Dial Century, Year, Month and Batch	In one of its sides the breaker is marked with permanent ink, year, month and batch.
Catalog	Attach catalogs indicating the technical specification
Shows	Submit sample of the product offered
Technical Warranty	2 YEARS
Place of Delivery	CNF&FOB
Delivery	25 DAYS

Gallery

PDF Download

Tags AC Triping Breaker, air circuit breaker, MCB, Mini Circuit Breaker

Thermal Overload Relay

Meba-thermal overload protection-GKU26

Post author By meba_admin
Post date 03/12/2013
No Comments on Meba-thermal overload protection-GKU26

Specification

Meba thermal overload protection GKU26 are suitable for overload and phase-failure protection of AC motors with frequency of 50 or 60Hz, voltage up to 690v, current up to 0.1-100A under 8-hours duty or uninterrupted duty.

Utilization category: AC- 3

Frequency:50 or 60Hz

Poles description: 3P/4P

Operating Conditions

1. The altitude couldn’t exceed 2000m.

2. Ambient temperature: -5℃ to +55℃ and the average temperature no more than +35℃in 24hours.

3. Atmosphere: Comparative humidity no more than 50% at max +40℃, and it may be higher at a lower temperature. The lowest average temperature no more than +20℃ in the wettest month. The maximum average comparative humidity of this month couldn t exceed 90%. The changeof temperature leading to dew on the product must be considered.

4. Class of pollution: Class 3.

5. The slope between installation surface and vertical surface couldn’t exceed 5^o.

6. Keeping away from explosive, corrosive and electric atomy.

7. Keeping dry.

8. The product should be used and installed at certain place without any shock, vibration etc.

Features

1.1 Component type: Thermal overload relay

1.2 Device short name：GKU

1.3 Application: phase-failure protection, temperature compensation, ON/OFF indication, Stop button, Test button and manual/automatic reset

1.4 Utilization category:AC-3

1.5 Frequency: 50Hz or 60Hz

1.6 Control circuit type: AC

1.7 Coil type: low consumption

1.8 Poles description: 3P/4P[/tab_item]

Gallery

Online Catalogue

Tags hot protector for overload and phase-failure

Thermal Overload Relay

Meba-hot relays-RD14

Specification

Meba-hot relays-RD14 are suitable for overload and phase-failure protection of AC motors with frequency of 50 or 60Hz, voltage up to 690v, current up to 0.1-100A under 8-hours duty or uninterrupted duty.

Utilization category: AC- 3

Frequency:50 or 60Hz

Poles description: 3P/4P

Operating Conditions

1. The altitude couldn’t exceed 2000m.

2. Ambient temperature: -5℃ to +55℃ and the average temperature no more than +35℃in 24hours.

4. Class of pollution: Class 3.

5. The slope between installation surface and vertical surface couldn’t exceed 5^o.

6. Keeping away from explosive, corrosive and electric atomy.

7. Keeping dry.

8. The product should be used and installed at certain place without any shock, vibration etc.

Features

1.1 Component type: Thermal overload relay

1.2 Device short name：RD14

1.3 Application: phase-failure protection, temperature compensation, ON/OFF indication, Stop button, Test button and manual/automatic reset

1.4 Utilization category:AC-3

1.5 Frequency: 50Hz or 60Hz

1.6 Control circuit type: AC

1.7 Coil type: low consumption

1.8 Poles description: 3P/4P[/tab_item]

Gallery

Online Catalogue

Tags Thermal relay for overload and phase-failure

Thermal Overload Relay

Meba-thermal overload relays-GKU16

Post author By meba_admin
Post date 03/12/2013
No Comments on Meba-thermal overload relays-GKU16

Specification

Meba thermal overload relays GKU16 are suitable for overload and phase-failure protection of AC motors with frequency of 50 or 60Hz, voltage up to 690v, current up to 0.1-100A under 8-hours duty or uninterrupted duty.

Utilization category: AC- 3

Frequency:50 or 60Hz

Poles description: 3P/4P

Operating Conditions

1. The altitude couldn’t exceed 2000m.

2. Ambient temperature: -5℃ to +55℃ and the average temperature no more than +35℃in 24hours.

4. Class of pollution: Class 3.

5. The slope between installation surface and vertical surface couldn’t exceed 5^o.

6. Keeping away from explosive, corrosive and electric atomy.

7. Keeping dry.

8. The product should be used and installed at certain place without any shock, vibration etc.

Features

1.1 Component type: Thermal overload relay

1.2 Device short name：GKU

1.3 Application: phase-failure protection, temperature compensation, ON/OFF indication, Stop button, Test button and manual/automatic reset

1.4 Utilization category:AC-3

1.5 Frequency: 50Hz or 60Hz

1.6 Control circuit type: AC

1.7 Coil type: low consumption

1.8 Poles description: 3P/4P[/tab_item]

Gallery

Online Catalogue

Tags hot relay, thermal overload protector